Festool

Festool Angle Unit 491588 (TS 55 + 75) Connects to the upper T-slot of FS Guide Rails for setting angles on material. 180° marked scale. Transfer angles from the wall to the work piece.

Festool Angle Unit 491588 (TS 55 + 75) Connects to the upper T-slot of FS Guide Rails for setting angles on material. 180° marked scale. Transfer angles from the wall to the work piece.

Container Set Box 100x350x68/2 pieces 204862

Easily and safely transport FSK Guide Rails. Equipped with shoulder strap.Available for the FSK 420 and FSK 670 rails.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

6" (150 mm)Extremely soft foam pads, the interface pads allow the abrasive to float, producing smoother results on delicate profiles and contours. This set comes with two (2) 5 mm-thick pads. Use the interface pads separately or stacked together for additional softness. (2 pieces)

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Hard StickFix pad maintains a crisp flat surface especially on edges. Great for surface leveling.

4 mm tenon(DF 500 only)

Festool Connector 482107 (TS 55 + 75)Connects two Guide Rails for long work pieces by sliding into the T-slot grooves in the rails. With 2 adjustable set screws per end for a secure connection.(1 piece; 2 are needed)

Festool Connector 482107 (TS 55 + 75)Connects two Guide Rails for long work pieces by sliding into the T-slot grooves in the rails. With 2 adjustable set screws per end for a secure connection.(1 piece; 2 are needed)

Container Set Box 150x150x68/6 pieces 204863

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Hard StickFix pad maintains a crisp flat surface especially on edges. Great for surface leveling.

3.5" (90 mm)Triangular pad for detail sanding. (1-piece)

5 mm Tenon (DF 500 only)

Container Set Box 150x300x68/2 pieces 204864

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

For profiles and contours. The extreme softness and give allows the abrasive to float easier on the surface for smoother results.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

3.5" (90 mm)For sanding in narrow places such as shutters and louvers. (1-piece)

FestoolSplinterguard Replacement 55" 495207 (TS 55 + 75)FS-SP 1400/T (55")Adhesive-backed Splinterguard to maintain splinter-free cut quality. Splinterguard material is semi-transparent for better visibility of the cut line and is quick and easy to replace.

FestoolSplinterguard Replacement 55" 495207 (TS 55 + 75)FS-SP 1400/T (55")Adhesive-backed Splinterguard to maintain splinter-free cut quality. Splinterguard material is semi-transparent for better visibility of the cut line and is quick and easy to replace.

6 mm tenon(DF 500 only)

Container Sets BS-Box/25 Pieces 204949

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

For profiles and contours. The extreme softness and give allows the abrasive to float easier on the surface for smoother results.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

3.5" (90 mm)Replaceable wear element of Extended Delta Sanding pad.

FestoolSplinterguard Replacement 197" 495209 (TS 55 + 75)FS-SP 5000/T (197")Adhesive-backed Splinterguard to maintain splinter-free cut quality. Splinterguard material is semi-transparent for better visibility of the cut line and is quick and easy to replace.

FestoolSplinterguard Replacement 197" 495209 (TS 55 + 75)FS-SP 5000/T (197")Adhesive-backed Splinterguard to maintain splinter-free cut quality. Splinterguard material is semi-transparent for better visibility of the cut line and is quick and easy to replace.

8 mm tenon

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Extremely soft foam pads, the interface pads allow the abrasive to float, producing smoother results on delicate profiles and contours. This set comes with two (2) 5 mm-thick pads. Use the interface pads separately or stacked together for additional softness. (2 pieces)

FestoolNon-Skid Strip Replacement 485724 (TS 55 + 75)Non-Slip adhesive strips to maintain the self-clamping feature of the Guide Rails, in a 32.8' (10 m) roll.

FestoolNon-Skid Strip Replacement 485724 (TS 55 + 75)Non-Slip adhesive strips to maintain the self-clamping feature of the Guide Rails, in a 32.8' (10 m) roll.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

3.5" (90 mm)Hard - Snap stud. (2-pieces)

10 mm tenon

An indispensable complement to the Domino XL, the new AssortmentSystainer is available in both 8/10 mm and 12/14 mm configurations, soyou take just what you need to the job at hand.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Festool LR 32 Hole Drilling Set in Systainer 584100Produce solid and consistent finished cabinets using the European frameless 32 mm system. Enables precision placement of shelf pin holes in casework.Includes:SYS 1 TL (497 563)LR 32 Hole Drilling Set (583 290)LR 32 Guide Rail Connector (496 938) (2 pieces)Dowel Drill HW D 5 mm-for stopped holes (491 066)Dowel Drill HW D 5 mm-for through holes (491 064)Cup Hinge Bit HW D 35 mm (491 077)Festool 120 Screw Clamps (489 570)*Guide Rail sold...

Removable wrap around protection to protect the pad as well as the adjacent surfaces from inadvertant pad contact. Great for up-close sanding.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

3.5" (90 mm)Soft - Snap stud. (2-pieces)

FestoolDeflector 489022Tool-free connection to Guide Rails via the T-slot and thumbscrew. Helps prevent the suction hose and cords from catching on the end of the Guide Rail for easier cord and hose management.

An indispensable complement to the Domino XL, the new AssortmentSystainer is available in both 8/10 mm and 12/14 mm configurations, soyou take just what you need to the job at hand.