Shop By Brand

DELTA CUTTER

Alignment ElementsMaterial: PlasticSize: 65 x 27 x 7 mmLateral Tolerance: ± 2 mm

Crown-Pro™ KMA2800Installing crown molding is one of the best ways to add instant value to your home. The Kreg Crown-Pro™ simplifies the most frustrating steps of the process, so you make fewer mistakes and get the job done faster!-Exact AnglesThis uniquely-designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts and difficult “coping.”-Versatile & CompatibleIts curved design lets you compensate for a wide variety of crown molding spring...

FestoolDust ExtractorsCT 48 E 58408428.1" x 15.4" x 26.75"35.9 lbsStandard Package Includes:Anti-Static Suction HoseFilterDisposable Filter BagContainer/ Filter Bag Capacity:12.7 gal/12.2 gal48 liters/46 liters

The DF 500 Assortment Systainer features the full range of tenons and cutters needed for use with the smaller Domino, so you have everything you need right at hand.

6" (150 mm)High-temp resistant for heavy-duty apllications. (1-piece)

Foam Inserts For SYS3 XXL 204947Protects the contents

FestoolGuide RailsFS 3000/2 491501118" (3,000 mm)Straight GuidanceSystem integrationClamp integrationNon-skid, self-clamping strips

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

9.8" (250 mm) Cross-cut CapacityWhen paired with the new HK/HKC Carpentry Saws you will get straight and quick cross-cuts every time. These guide rails feature integrated adjustable angle stops along with a selfretraction feature. The new guide rails work only with the new HK/HKC Carpentry Saws.

Kreg Adaptive Cutting System Project Table - Top ACS-TTOP Portable, multipurpose table top with integrated guides for precise rip, angled, and crosscuts in boards and plywood. MDF and aluminum table designed to support and position solid wood and plywood while cutting with the Kreg Adaptive Cutting System Plunge Saw and Guide TrackLarge 55" x 29 3/4" surface supports plywood sheets and boards while cuttingIntegrated measuring scales ensure accurate, repeatable cuts and simple...

Kreg Jig® Mini MKJKIT-Simple.The Kreg Jig® Mini is good for very specific applications where the smallest jig possible is required. The simplistic design includes the hardened-steel drill guide of the other jigs but does not include a reference fence, so material thickness adjustments must be made manually.-Unlimited Material ThicknessThe Kreg Jig® Mini is the only Kreg Jig® that does not include a positioning fence. This fenceless design allows you to make precise angle and stock depth...

PDC 18 Cordless Percussion Drill Set 576476Includes: Belt clip, (2) BP 18 Li 4.0 HPC-ASI battery pack, Rapid charger TCL 6, Right angle chuck, Systainer SYS3 M 187.Strengths & BenefitsDriven by a four-speed gearbox- low to hog out material, high-speed hammer function to plow through concrete, or mid-range for all common drilling applications.Supported by its own set of Fastfix interchangeable chucks and the complete Centrotec bit change system.EC-TEC brushless motor-coupled with the...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Replacement Sanding Pad for the RTS 400 REQ

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

The engraving bit allows for cutting fine lines in a range of materials. Detailed Specs: Material: Solid CarbideOverall Length: 1.5”Shank Diameter: 0.25”Cut Diameter: 0.25”Cut Length: 0.25”Cut Angle: 60˚End Type: V-Bit, Engraving

FestoolSplinterguard 499011 (TS 55 Only)Flush-Mount Splinterguard protects material surface for both straight and bevel cuts. (5 pieces)

SYS3 M 437 204845396 x 296 x 437 mm

SYS3 Org L 89 - 10 pieces 204857508 x 296 x 89Includes: 1 - 50 x 50 x 684 - 50 x 100 x 681 - 100 x 100 x 683 - 100 x 150 x 681 - 100 x 350 x 68

Tenryu Silencer Series12" x 60T ATAF Blade1" ArborWoodGreat For:Miter/Chop SawsCut-Offs and Miter CutsGeneral Purpose

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.LSP1060T10" x 60T x 5/8" TCG Carbide Saw10° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

DELTA CUTTER

Base Pad For SYS3 M 204941Protects the content

BHC 18 Cordless Rotary Hammer Drill Basic 574724Includes: Belt clip, Bare tool without battery pack, Without charger, Systainer SYS 2 TL.Strengths & BenefitsThe best power-to-weight ratio in its class.Compact and ergonomic C-handle design.Light weight and low vibration makes for efficient and comfortable one-handed use, whether for extended periods or overheard applications.The BHC 18 does not disappoint.

FestoolDust ExtractorsCT 36 AC 58401424.8" x 14.4" x 23.4"33.5 lbsStandard Package Includes:Anti-Static Suction HoseFilterDisposable Filter BagContainer/Filter Bag Capacity:9.5 gal / 36 liters

4 mm Cutter for the DF 500 Q Domino Joiner

5 mm Cutter for the DF 500 Q Domino Joiner

Slide-In Connector | Self Clamping Material: Fiberglass Reinforced Plastic Size: 52 x 19 x 9.7 mm Lateral Tolerance: ± 1 mm ...

Effortlessly transition from corded to cordless without compromising performance. Balanced with a unique ergonomic battery for optimum performance and handling the ETSC 125 has the power and dust extraction for a fine sanding result. This dual power mode sander allows you the flexibility to sand whenever or wherever. Includes: StickFix Soft Sander Backing Pad for ETS 125 Sander, D125; Festool PROTECTOR; longlife dust bag; 2 x BP 18 Li 3.1 ERGO battery pack; rapid charger TCL 6; ACA 18 V ERGO...

5" (125 mm)For medium/fine sanding and finishing sanding. The extra softness allows the abrasive to float for smoother results. (1-piece)

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

16.5" (420 mm) Cross-cut CapacityWhen paired with the new HK/HKC Carpentry Saws you will get straight and quick cross-cuts every time. These guide rails feature integrated adjustable angle stops along with a selfretraction feature. The new guide rails work only with the new HK/HKC Carpentry Saws.

Heavy-Duty Bench Clamp System KBC3-HDSYSFor 360° clamping on the go, check out the Heavy-Duty Bench Clamp System. It combines a 3" Bench Clamp with a thick 10" x 10" powder-coated steel plate. Rubber feet allow this system to be used anywhere. Or, the plate can be recessed into a work surface.Thanks to Automaxx® Auto-Adjust Technology, the Bench Clamp adjusts to match material thickness automatically with a simple squeeze of the handles—whether the material is thick, thin, or in between. The...

Kreg Adaptive Cutting System 62" Guide Track ACS430 High-performance track for straight, splinter-free cuts with the Kreg® Plunge Saw Aluminum guide track for cutting solid wood and plywood with the Kreg Plunge SawVersatile track cuts precisely alone or on the Adaptive Cutting System Project TablePrecise zero-offset design aligns track edge with exact cut locationSplinter-free cutting with anti-chip strip that hugs the blade and cutlineSecure positioning using two anti-slip strips that hold...

Festool Limit Stop 491582 (TS 55 + 75)Set Points on the Guide Rail for repeat cuts and plunge-cuts. Infinitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Pocket-Hole Screw Project Kit SK03This kit contains five of the most popular self-tapping Kreg Screws, secured in a durable, easy-to-carry case. Makes a great starter kit for anyone new to Kreg Joinery.Includes:-150-count of:SPS-F1 - 1" (25mm)SPS-C1 - 1" (25mm)SML-F125 - 11/4" (31mm)SML-C125 - 11/4" (31mm)-75-count of:SML-C250B - 21/2" (63mm)Screw Diameters:#8 - All SML coarse-threaded screws (with the exception of stainless).#7 - All SML fine-threaded screws and all SPS coarse-threaded...

Precision Miter Gauge System KMS7102Why spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? Our Precision Miter Gauge System requires no calibrating and features positive stops at 0°, 10°, 22½°, 30° and 45° to make it easy to cut accurate miters quickly. Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree.Plus, the Precision Miter Gauge System offers a long,...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Replacement Sanding Pad for the RS 2 E Finish Orbital Sander.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

SYS3 L 137 204846508 x 296 x 137 mm

Tenryu Silencer Series12" x 80T ATAF Blade1" ArborWoodGreat For:Miter/Chop SawsCut-Offs and Miter CutsFine Cuts

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.SPE1080A10" x 80T x 5/8" ATB Carbide Saw5° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

DELTA CUTTER

Base Pad For SYS3 L 204945Protects the content