Sanders

A great all around sander, the DTS 400 REQ is designed for fine sanding small, angular surfaces that are difficult to reach. With a short 5/64” (2 mm) stroke, this sander gives you a super-fine finished surface.

Perform near-fl awless fi nishes with the new ETS 125 REQ random orbit sander. Equipped with a powerful 250 watt motor and MMC Electronics for optimum performance, the ETS 125 REQ provides smooth performance and solid results with a 5/64� (2.0 MM) sanding stroke. Reduce fatigue through improved ergonomics with a rubberized grip and over-sized power switch.

The ETS 150/3 is a favorite for fi ne and extra-fi ne sanding, producing an excellent surface fi nish with a short 1/8" (3.0 mm) stroke. The ETS 150/5, with a 3/16" (5.0 mm) stroke, is perfect for light or intermediate sanding. Both feature a rubberized top grip, ergonomic handle, fi ngertip switch and vibration-stop balancing to reduce discomfort. In short, they each perform on a level that most people are likely not to have experienced.

The ETS 150/3 is a favorite for fi ne and extra-fi ne sanding, producing an excellent surface fi nish with a short 1/8" (3.0 mm) stroke. The ETS 150/5, with a 3/16" (5.0 mm) stroke, is perfect for light or intermediate sanding. Both feature a rubberized top grip, ergonomic handle, fi ngertip switch and vibration-stop balancing to reduce discomfort. In short, they each perform on a level that most people are likely not to have experienced.

Equipped with the EC-TEC� Brushless Motor, these low-profile, long-life and low-vibration sanders can run all day with multiple shifts. With a fine sanding stroke of 1/8� (3mm) and a smaller 5� pad, the ETS EC 125/3 is great for verticaland overhead surfaces, as well as general purpose sanding. Featuring a compact design, ergonomic grip and an electronic vibration control system, this tool allows for less fatigue and makes it more comfortable to work.

Equipped with the EC-TEC� Brushless Motor, these lowprofile, long-life and low-vibration sanders can run all day with multiple shifts. Available in a fine 1/8� (3mm) stroke or a broader 3/16� (5 mm stroke), these sanders use a larger 6� pad and offer the performance of an air sander without the bulk of an air system. Not to mention, their compact design and ergonomic grip save time and allow for less fatigue � making them the ultimate high-demand sanding tools.

Equipped with the EC-TEC� Brushless Motor, these lowprofile, long-life and low-vibration sanders can run all day with multiple shifts. Available in a fine 1/8� (3mm) stroke or a broader 3/16� (5 mm stroke), these sanders use a larger 6� pad and offer the performance of an air sander without the bulk of an air system. Not to mention, their compact design and ergonomic grip save time and allow for less fatigue � making them the ultimate high-demand sanding tools.

Take versatility to new levels with a compact, four-machines-in-one unit. The RO 90 excels as an aggressive rotary sander, a random orbit finish sander and even as a rotary polisher. With a twist of the dial and tool-less pad changeover, the RO 90 is the only Rotex that also functions as a detail sander.

This sander gives you everything Rotex has to offer in a compact, lightweight, and powerful package. The RO 125 puts 500 watts of power, dual-mode sanding and triple-function performance into a comfortable, 4.4 pounds. It’s a 5" sander that does it all—coarse and fine sanding, plus polishing.

This sander is well-suited for a wide range of one-handed applications, the RTS 400 REQ is ideal for working on flat, vertical, and overhead surfaces because of its compact design and weight of only 2.6 lbs.

Never before has such a powerful sander been so refined. The Rotex RO 150 changes effortlessly from coarse sanding, to fine sanding, to polishing. Changing pads is simple, requiring no extra tools. 720 watts of power means the RO 150 can take on any job.

3.5" (90 mm)High-temp resistant for heavy-duty applications. (1-piece)

**For use on ETS 125 REQ and ETSC 125 only**IncludesLAS-H-ES base runnerLAS-W-ES base runnerhex key, WAF 5in cartonFunctionsThe Festool Edge Sanding Guide gives you the speed and reliable finish quality that you would otherwise only expect from stationary edge-sanding equipment. Easily and quickly attaches to the 5” Random Orbit Sander ETS 125 REQ and the Cordless Sander ETSC 125. Its intuitive and ergonomic design adapts to practically any kind of edge, angle, or curvature. Create finished...

5" (125 mm)High-temp resistant for heavy-duty applications. (1-piece)

6" (150 mm)High-temp resistant for heavy-duty apllications. (1-piece)

Replacement Sanding Pad for the RTS 400 REQ

5" (125 mm)For medium/fine sanding and finishing sanding. The extra softness allows the abrasive to float for smoother results. (1-piece)

Replacement Sanding Pad for the RS 2 E Finish Orbital Sander.

6" (150 mm)For medium/fine sanding and finishing sanding. The extra softness allows the abrasive to float for smoother results. (1-piece)

High-temp resistant for heavy-duty applications. White ring feature on pad face for easy abrasive change.

3.5" (90 mm)Maintain a crisp and flat surface especially on edges. (1-piece)

Foam pad conforms to different profiles for fine finishing. Also useful to enlarge convex profiles or reduce concave profiles for a custom fit. (2-Pieces)

High-temp resistant for heavy-duty applications. White ring feature on pad face for easy abrasive change.

5" (125 mm)Maintain a crisp and flat surface especially on edges. (1-piece)

Removable wrap around protection to protect the pad as well as the adjacent surfaces from inadvertent pad contact. Great for up close sanding.  

High-temp resistant for heavy-duty applications. White ring feature on pad face for easy abrasive change.

6" (150 mm)Maintain a crisp and flat surface especially on edges. (1-piece)

Removable wrap around protection to protect the pad as well as the adjacent surfaces from inadvertent pad contact. Great for up close sanding.

For medium/fine sanding and finishing. The extra softness is more forgiving and allows the abrasive to float easier on the surface for smoother result.

3.5" (90 mm)For profiles and contours. The extreme softness and give allows the abrasive to float easier on the surface for smoother results. (1-piece)

For medium/fine sanding and finishing. The extra softness is more forgiving and allows the abrasive to float easier on the surface for smoother result.

5" (125 mm)For profiles and contours. The extreme softness and give allows the abrasive to float easier on the surface for smoother results. (1-piece)

Re-usable capture bag comprised of extra-durable nonwoven polyester for extra-long life. These bags are meant to capture sanding dust, be emptied, and then re-used many times.

For medium/fine sanding and finishing. The extra softness is more forgiving and allows the abrasive to float easier on the surface for smoother result.

6" (150 mm)Extremely soft foam pads, the interface pads allow the abrasive to float, producing smoother results on delicate profiles and contours. This set comes with two (2) 5 mm-thick pads. Use the interface pads separately or stacked together for additional softness. (2 pieces)

Hard StickFix pad maintains a crisp flat surface especially on edges. Great for surface leveling.

Hard StickFix pad maintains a crisp flat surface especially on edges. Great for surface leveling.

3.5" (90 mm)Triangular pad for detail sanding. (1-piece)

For profiles and contours. The extreme softness and give allows the abrasive to float easier on the surface for smoother results.

3.5" (90 mm)For sanding in narrow places such as shutters and louvers. (1-piece)

3.5" (90 mm)Replaceable wear element of Extended Delta Sanding pad.

3.5" (90 mm)Hard - Snap stud. (2-pieces)

Removable wrap around protection to protect the pad as well as the adjacent surfaces from inadvertant pad contact. Great for up-close sanding.

3.5" (90 mm)Soft - Snap stud. (2-pieces)

Re-usable capture bag comprised of extra-durable nonwoven polyester for extra-long life. These bags are meant to capture sanding dust, be emptied, and then re-used many times.

Adapter snaps into the ETSC Sander to provide uninterrupted power from AC power sources (110V AC). Compatible with 18 AWG Plug-It cords (included).

3.5" (90 mm)Prevents pad contact with adjacent surface for up-close sanding and longer pad life.

5" (125 mm)Prevents pad contact with adjacent surface for up-close sanding and longer pad life.