Call us Toll Free! 1-866-96-SHARP




P: (401)725-2920 F: (401)728-2144 Address: 260 Middle St Pawtucket, RI 02860

H: Mon-Thur 7:30 a.m. - 5:00 p.m. Fri 7:30 a.m. - 4:00 p.m. Sat - 8:00 a.m. - 12:00 p.m.


Products 1-48 of 267
Show
2D/3D Carving CNC Bit 46280-K 1/32" Dia. 1" Cut Length 1/64" Radius 6.2° Angle 1/4" Shank 3 Flute 3" Overall Length
Price: $54.60
View
Availability: In Stock
Item #: 46280-K -

2D/3D Carving CNC Bit 46280-K 1/32" Dia. 1" Cut Length 1/64" Radius 6.2° Angle 1/4" Shank 3 Flute 3" Overall Length

Ball Nose Spiral CNC Bit 46369-K 1/8" Dia. 1/2" Cut Length 1/16" Radius 1/4" Shank 2 Flute 2" Overall Length
Price: $42.90
View
Availability: In Stock
Item #: 46369-K -

Ball Nose Spiral CNC Bit 46369-K 1/8" Dia. 1/2" Cut Length 1/16" Radius 1/4" Shank 2 Flute 2" Overall Length

Composite CNC Bit 46260-K 1/8" Dia. 1/2" Cut Length 1/8" Shank 10 Flute 2" Overall Length
Price: $22.25
View
Availability: In Stock
Item #: 46260-K -

Composite CNC Bit 46260-K 1/8" Dia. 1/2" Cut Length 1/8" Shank 10 Flute 2" Overall Length

Compression Spiral CNC Bit 46180-K 1/8" Dia. 13/16" Cut Length 7/32" Up-Cut Length 1/8" Shank 2 Flute 2-1/2" Overall Length
Price: $50.70
View
Availability: In Stock
Item #: 46180-K -

Compression Spiral CNC Bit 46180-K 1/8" Dia. 13/16" Cut Length 7/32" Up-Cut Length 1/8" Shank 2 Flute 2-1/2" Overall Length

Engraving CNC Router Bit 45771-K 30° Angle 0.440" Cut Length 1/4" Shank 0.005" Tip Width 2" Overall Length
Price: $35.10
View
Availability: In Stock
Item #: 45771-K -

Engraving CNC Router Bit 45771-K 30° Angle 0.440" Cut Length 1/4" Shank 0.005" Tip Width 2" Overall Length

Flush Trim Plunge Template 2 Flute 3/16" Dia. 1/4" Cutting 1/4" Shank 1-3/4" Overall Length 47222-S
Price: $33.00
View
Availability: In Stock
Item #: 47222-S -

Flush Trim Plunge Template Carbide Tipped 2 & 3 Flute with Upper Ball Bearing - This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers.

Mortise Compression Spiral CNC Bit 46350-K 1/4" Dia. 1" Cut Length 1/8" Up-Cut Length 1/4" Shank 2 Flutes 2-1/2" Overall Length
Price: $62.40
View
Availability: In Stock
Item #: 46350-K -

Mortise Compression Spiral CNC Bit 46350-K 1/4" Dia. 1" Cut Length 1/8" Up-Cut Length 1/4" Shank 2 Flutes 2-1/2" Overall Length

Plastic Cutting Carbide Tipped 2 Flute 1/2" Dia. 3/8" D1 3 Deg 1-1/4" Cutting Length  1/2" Shank 3-1/8" Overall Length 42420
Price: $34.30
View
Availability: In Stock
Item #: 42420 -

This slightly tapered bit is specifically designed for wood patternmaking, especially wood vacuum forming molds where draft (3, 5 and 7 Degree taper) is required for releasing the styrene or other plastic from the mold. It can be used to bevel the leading edge on a door.

Plastic Spiral "O" Flute CNC Bit 51441-K 1/16" Dia. 1/4" Cut Length 1/4" Shank 1 Flute 2" Overall Length Up-Cut
Price: $39.00
View
Availability: In Stock
Item #: 51441-K -

Plastic Spiral "O" Flute CNC Bit 51441-K 1/16" Dia. 1/4" Cut Length 1/4" Shank 1 Flute 2" Overall Length Up-Cut

Plastic Spiral "O" Flute CNC Bit 51510-K 1/8" Dia. 1/2" Cut Length 1/8" Shank 1 Flute 2" Overall Length Down-Cut
Price: $31.20
View
Availability: In Stock
Item #: 51510-K -

Plastic Spiral "O" Flute CNC Bit 51510-K 1/8" Dia. 1/2" Cut Length 1/8" Shank 1 Flute 2" Overall Length Down-Cut

Spiral Plunge CNC Bit 46125-K 1/8" Dia. 13/16" Cut Length 1/4" Shank 2 Flute 2-1/2" Overall Length Up-Cut
Price: $36.65
View
Availability: In Stock
Item #: 46125-K -

Spiral Plunge CNC Bit 46125-K 1/8" Dia. 13/16" Cut Length 1/4" Shank 2 Flute 2-1/2" Overall LengthUp-Cut

Spiral Plunge CNC Bit 46229-K 1/32" Dia. 1/8" Cut Length 1/8" Shank 2 Flute 2" Overall Length Down-Cut
Price: $31.20
View
Availability: In Stock
Item #: 46229-K -

Spiral Plunge CNC Bit 46229-K 1/32" Dia. 1/8" Cut Length 1/8" Shank 2 Flute 2" Overall Length Down-Cut

Straight Plunge Carbide Tipped 2 Flute 1.3mm Dia. 4.5mm Cutting 1/4" Shank 1-7/8" Overall Length 45260
Price: $24.35
View
Availability: In Stock
Item #: 45260 -

High Production Straight Plunge Carbide Tipped using a two-flute bit where the finish is paramount. Two Flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.

Straight Plunge Carbide Tipped 2 Flute 1/4" Dia. 3/4" Cutting 1/2" Shank 2-1/2" Overall Length 45408 (*Solid Carbide Cutting Edge)
Price: $18.75
View
Availability: In Stock
Item #: 45408 -

High Production Straight Plunge Carbide Tipped Router Bits AMAX extended life carbide features a 200% longer tool life, a superior geometric design and super clean cuts in wood, MDF, and plywood.

2D/3D Carving CNC Bit 46282-K 1/16" Dia. 1" Cut Length 1/32" Radius 5.4° Angle 1/4" Shank 4 Flute 3" Overall Length
Price: $54.60
View
Availability: In Stock
Item #: 46282-K -

2D/3D Carving CNC Bit 46282-K 1/16" Dia. 1" Cut Length 1/32" Radius 5.4° Angle 1/4" Shank 4 Flute 3" Overall Length

Ball Nose Spiral CNC Bit 46376-K 1/4" Dia. 1" Cut Length 1/8" Radius 1/4" Shank 2 Flute 2-1/2" Overall Length
Price: $49.90
View
Availability: In Stock
Item #: 46376-K -

Ball Nose Spiral CNC Bit 46376-K 1/4" Dia. 1" Cut Length 1/8" Radius 1/4" Shank 2 Flute 2-1/2" Overall Length

Composite CNC Bit 46264-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 10 Flute 3" Overall Length
Price: $49.90
View
Availability: In Stock
Item #: 46264-K -

Composite CNC Bit 46264-K1/4" Dia. 3/4" Cut Length 1/4" Shank 10 Flute 3" Overall Length

Compression Spiral CNC Bit 46170-K 1/4" Dia. 7/8" Cut Length 7 mm Up-Cut Length 1/4" Shank 2 Flute 2-1/2" Overall Length
Price: $56.90
View
Availability: In Stock
Item #: 46170-K -

Compression Spiral CNC Bit 46170-K 1/4" Dia. 7/8" Cut Length 7 mm Up-Cut Length 1/4" Shank 2 Flute 2-1/2" Overall Length

Flush Trim Plunge Template 2 Flute 3/16" Dia. 1/2" Cutting 1/8" Shank 2" Overall Length 47220
Price: $32.00
View
Availability: In Stock
Item #: 47220 -

Flush Trim Plunge Template Carbide Tipped 2 & 3 Flute with Upper Ball Bearing - This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers.

Mortise Compression Spiral CNC Bit 46367-K 3/8" Dia. 7/8" Cut Length 1/8" Up-Cut Length 3/8" Shank 2 Flutes 3" Overall Length
Price: $78.00
View
Availability: In Stock
Item #: 46367-K -

Mortise Compression Spiral CNC Bit 46367-K 3/8" Dia. 7/8" Cut Length 1/8" Up-Cut Length 3/8" Shank 2 Flutes 3" Overall Length

Plastic Cutting Carbide Tipped 2 Flute 19/32" Dia. 3/8" D1 5 Deg 1-1/4" Cutting Length  1/2" Shank 3-5/32" Overall Length 42422
Price: $48.45
View
Availability: In Stock
Item #: 42422 -

This slightly tapered bit is specifically designed for wood patternmaking, especially wood vacuum forming molds where draft (3, 5 and 7 Degree taper) is required for releasing the styrene or other plastic from the mold. It can be used to bevel the leading edge on a door.

Plastic Spiral "O" Flute CNC Bit 51410-K 1/8" Dia. 1/2" Cut Length 1/8" Shank 1 Flute 2" Overall Length Up-Cut
Price: $31.20
View
Availability: In Stock
Item #: 51410-K -

Plastic Spiral "O" Flute CNC Bit 51410-K 1/8" Dia. 1/2" Cut Length 1/8" Shank 1 Flute 2" Overall Length Up-Cut

Plastic Spiral "O" Flute CNC Bit 51511-K 1/8" Dia. 1/2" Cut Length 1/4" Shank 1 Flute 2" Overall Length Down-Cut
Price: $37.40
View
Availability: In Stock
Item #: 51511-K -

Plastic Spiral "O" Flute CNC Bit 51511-K 1/8" Dia. 1/2" Cut Length 1/4" Shank 1 Flute 2" Overall Length Down-Cut

Spiral Plunge CNC Bit 46102-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 2 Flute 2-1/2" Overall Length Up-Cut
Price: $28.85
View
Availability: In Stock
Item #: 46102-K -

Spiral Plunge CNC Bit 46102-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 2 Flute 2-1/2" Overall LengthUp-Cut

Spiral Plunge CNC Bit 46237-K 1/16" Dia. 3/16" Cut Length 1/8" Shank 2 Flute 2" Overall Length Down-Cut
Price: $28.85
View
Availability: In Stock
Item #: 46237-K -

Spiral Plunge CNC Bit 46237-K 1/16" Dia. 3/16" Cut Length 1/8" Shank 2 Flute 2" Overall Length Down-Cut

Straight Plunge Carbide Tipped 2 Flute 1/16" Dia. 3/16" Cutting 1/8" Shank 1-1/2" Overall Length 46480 (*Solid Carbide)
Price: $18.40
View
Availability: In Stock
Item #: 46480 -

High Production Straight Plunge Carbide Tipped using a two-flute bit where the finish is paramount. Two Flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.

Straight Plunge Carbide Tipped 2 Flute 1/4" Dia. 1" Cutting 1/2" Shank 2-3/4" Overall Length 45486
Price: $33.90
View
Availability: In Stock
Item #: 45486 -

High Production Straight Plunge Carbide Tipped Router Bits AMAX extended life carbide features a 200% longer tool life, a superior geometric design and super clean cuts in wood, MDF, and plywood.

2D/3D Carving CNC Bit 46290-K 1/16" Dia. 5/16" Cut Length 0.10° Angle 1/4" Shank 3 Flute 2" Overall Length
Price: $34.30
View
Availability: In Stock
Item #: 46290-K -

2D/3D Carving CNC Bit 46290-K 1/16" Dia. 5/16" Cut Length 0.10° Angle 1/4" Shank 3 Flute 2" Overall Length

Ball Nose Spiral CNC Bit 46380-K 1/2" Dia. 1-1/4" Cut Length 1/4" Radius 1/2" Shank 2 Flute 3" Overall Length
Price: $92.80
View
Availability: In Stock
Item #: 46380-K -

Ball Nose Spiral CNC Bit 46380-K 1/2" Dia. 1-1/4" Cut Length 1/4" Radius 1/2" Shank 2 Flute 3" Overall Length

Compression Spiral CNC Bit 46171-K 3/8" Dia. 7/8" Cut Length .200" Up-Cut Length 3/8" Shank 2 Flute 3" Overall Length
Price: $80.75
View
Availability: In Stock
Item #: 46171-K -

Compression Spiral CNC Bit 46171-K 3/8" Dia. 7/8" Cut Length .200" Up-Cut Length 3/8" Shank 2 Flute 3" Overall Length

Flush Trim Plunge Template 2 Flute 3/16" Dia. 1/2" Cutting 1/4" Shank 2" Overall Length 47222
Price: $31.20
View
Availability: In Stock
Item #: 47222 -

Flush Trim Plunge Template Carbide Tipped 2 & 3 Flute with Upper Ball Bearing - This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers.

Mortise Compression Spiral CNC Bit 46020-K 3/8" Dia. 1" Cut Length 3/16" Up-Cut Length 3/8" Shank 3 Flutes 3" Overall Length
Price: $80.30
View
Availability: In Stock
Item #: 46020-K -

Mortise Compression Spiral CNC Bit 46020-K 3/8" Dia. 1" Cut Length 3/16" Up-Cut Length 3/8" Shank 3 Flutes 3" Overall Length

Plastic Cutting Carbide Tipped 2 Flute 13/16" Dia. 3/8" D1 7 Deg 1-1/4" Cutting Length 1/2" Shank 3-5/32" Overall Length 42424
Price: $48.45
View
Availability: In Stock
Item #: 42424 -

This slightly tapered bit is specifically designed for wood patternmaking, especially wood vacuum forming molds where draft (3, 5 and 7 Degree taper) is required for releasing the styrene or other plastic from the mold. It can be used to bevel the leading edge on a door.

Plastic Spiral "O" Flute CNC Bit 51446-K 1/8" Dia. 3/4" Cut Length 1/4" Shank 1 Flute 2-1/2" Overall Length Up-Cut
Price: $41.30
View
Availability: In Stock
Item #: 51446-K -

Plastic Spiral "O" Flute CNC Bit 51446-K 1/8" Dia. 3/4" Cut Length 1/4" Shank 1 Flute 2-1/2" Overall Length Up-Cut

Plastic Spiral "O" Flute CNC Bit 51517-K 3/16" Dia. 5/8" Cut Length 1/4" Shank 1 Flute 2" Overall Length Down-Cut
Price: $40.55
View
Availability: In Stock
Item #: 51517-K -

Plastic Spiral "O" Flute CNC Bit 51517-K 3/16" Dia. 5/8" Cut Length 1/4" Shank 1 Flute 2" Overall Length Down-Cut

Spiral Plunge CNC Bit 46202-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 2 Flute 2-1/2" Overall Length Down-Cut
Price: $28.85
View
Availability: In Stock
Item #: 46202-K -

Spiral Plunge CNC Bit 46202-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 2 Flute 2-1/2" Overall Length Down-Cut

Spiral Plunge CNC Bit 46320-K 3/8" Dia. 1-1/4" Cut Length 3/8" Shank 2 Flute 3" Overall Length Up-Cut
Price: $54.60
View
Availability: In Stock
Item #: 46320-K -

Spiral Plunge CNC Bit 46320-K 3/8" Dia. 1-1/4" Cut Length 3/8" Shank 2 Flute 3" Overall LengthUp-Cut

Straight Plunge Carbide Tipped 2 Flute 1/16" Dia. 3/16" Cutting 1/4" Shank 1-5/8" Overall Length 45190 (*with Solid Carbide Cutting Edge)
Price: $20.40
View
Availability: In Stock
Item #: 45190 -

High Production Straight Plunge Carbide Tipped using a two-flute bit where the finish is paramount. Two Flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.

Straight Plunge Carbide Tipped 2 Flute 9/32" Dia. 3/4" Cutting 1/2" Shank 2-3/4" Overall Length 45409
Price: $21.80
View
Availability: In Stock
Item #: 45409 -

High Production Straight Plunge Carbide Tipped Router Bits AMAX extended life carbide features a 200% longer tool life, a superior geometric design and super clean cuts in wood, MDF, and plywood.

2D/3D Carving CNC Bit 46284-K 1/8" Dia. 1-1/2" Cut Length 1/16" Radius 1° Angle 1/4" Shank 3 Flute 3" Overall Length
Price: $62.40
View
Availability: In Stock
Item #: 46284-K -

2D/3D Carving CNC Bit 46284-K 1/8" Dia. 1-1/2" Cut Length 1/16" Radius 1° Angle 1/4" Shank 3 Flute 3" Overall Length

Ball Nose Spiral CNC Bit 46384-K 1/2" Dia. 2-1/8" Cut Length 1/4" Radius 1/2" Shank 2 Flute 4" Overall Length
Price: $106.05
View
Availability: In Stock
Item #: 46384-K -

Ball Nose Spiral CNC Bit 46384-K 1/2" Dia. 2-1/8" Cut Length 1/4" Radius 1/2" Shank 2 Flute 4" Overall Length

Compression Spiral CNC Bit 46011-K 3/8" Dia. 7/8" Cut Length .200" Up-Cut Length 3/8" Shank 3 Flute 3" Overall Length
Price: $81.10
View
Availability: In Stock
Item #: 46011-K -

Compression Spiral CNC Bit 46011-K 3/8" Dia. 7/8" Cut Length .200" Up-Cut Length 3/8" Shank 3 Flute 3" Overall Length

Flush Trim Plunge Template 2 Flute 1/4" Dia. 1/4" Cutting 1/8" Shank 1-15/16" Overall Length 47223-S
Price: $32.15
View
Availability: In Stock
Item #: 47223-S -

Flush Trim Plunge Template Carbide Tipped 2 & 3 Flute with Upper Ball Bearing - This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers.

Mortise Compression Spiral CNC Bit 46021-K 3/8" Dia. 1-1/4" Cut Length 3/16" Up-Cut Length 3/8" Shank 2 Flutes 3" Overall Length
Price: $74.85
View
Availability: In Stock
Item #: 46021-K -

Mortise Compression Spiral CNC Bit 46021-K 3/8" Dia. 1-1/4" Cut Length 3/16" Up-Cut Length 3/8" Shank 2 Flutes 3" Overall Length

Plastic Cutting Carbide Tipped 2 Flute 3/4" Dia. 1/2" D1 3 Deg 2-1/8" Cutting Length 1/2" Shank 4-5/8" Overall Length (**Not for CNC) 47144
Price: $54.60
View
Availability: In Stock
Item #: 47144 -

This slightly tapered bit is specifically designed for wood patternmaking, especially wood vacuum forming molds where draft (3, 5 and 7 Degree taper) is required for releasing the styrene or other plastic from the mold. It can be used to bevel the leading edge on a door.

Plastic Spiral "O" Flute CNC Bit 51417-K 3/16" Dia. 5/8" Cut Length 1/4" Shank 1 Flute 2" Overall Length Up-Cut
Price: $40.55
View
Availability: In Stock
Item #: 51417-K -

Plastic Spiral "O" Flute CNC Bit 51417-K 3/16" Dia. 5/8" Cut Length 1/4" Shank 1 Flute 2" Overall Length Up-Cut

Plastic Spiral "O" Flute CNC Bit 51504-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 1 Flute 2" Overall Length Down-Cut
Price: $39.00
View
Availability: In Stock
Item #: 51504-K -

Plastic Spiral "O" Flute CNC Bit 51504-K 1/4" Dia. 3/4" Cut Length 1/4" Shank 1 Flute 2" Overall Length Down-Cut

Spiral Plunge CNC Bit 46106-K 1/2" Dia. 1-1/4" Cut Length 1/2" Shank 2 Flute 3" Overall Length Up-Cut
Price: $82.30
View
Availability: In Stock
Item #: 46106-K -

Spiral Plunge CNC Bit 46106-K 1/2" Dia. 1-1/4" Cut Length 1/2" Shank 2 Flute 3" Overall LengthUp-Cut