Festool

Domino DF 500 Q Joiner Never again will joining be a slow, difficult process. The domino joining system makes flawless mortises every single time, thanks to a revolutionary cutting method, simple indexing features and adjustable mortising sizing. Set Includes: 5 mm Domino Cutter Support Bracket Wrench Trim Stop Cross Stop Plug-it Power Cord SYS 2 TL ...

Domino DF 700 EQ Joiner Set Build solid and durable mortise and tenon joints in a fraction of the time it takes with traditional methods or stationary equipment. the Domino XL lets you bring the tool to the work, greatly reducing setup time while simply and effectively producing full-sized mortise and tenon joints. Set Includes: 12 mm Domino Cutter Support Bracket Wrench Trim Stop Cross Stop Plug-it Power Cord SYS 5 TL ...

A great all around sander, the DTS 400 REQ is designed for fine sanding small, angular surfaces that are difficult to reach. With a short 5/64” (2 mm) stroke, this sander gives you a super-fine finished surface.

Perform near-fl awless fi nishes with the new ETS 125 REQ random orbit sander. Equipped with a powerful 250 watt motor and MMC Electronics for optimum performance, the ETS 125 REQ provides smooth performance and solid results with a 5/64� (2.0 MM) sanding stroke. Reduce fatigue through improved ergonomics with a rubberized grip and over-sized power switch.

The ETS 150/3 is a favorite for fi ne and extra-fi ne sanding, producing an excellent surface fi nish with a short 1/8" (3.0 mm) stroke. The ETS 150/5, with a 3/16" (5.0 mm) stroke, is perfect for light or intermediate sanding. Both feature a rubberized top grip, ergonomic handle, fi ngertip switch and vibration-stop balancing to reduce discomfort. In short, they each perform on a level that most people are likely not to have experienced.

The ETS 150/3 is a favorite for fi ne and extra-fi ne sanding, producing an excellent surface fi nish with a short 1/8" (3.0 mm) stroke. The ETS 150/5, with a 3/16" (5.0 mm) stroke, is perfect for light or intermediate sanding. Both feature a rubberized top grip, ergonomic handle, fi ngertip switch and vibration-stop balancing to reduce discomfort. In short, they each perform on a level that most people are likely not to have experienced.

Equipped with the EC-TEC� Brushless Motor, these low-profile, long-life and low-vibration sanders can run all day with multiple shifts. With a fine sanding stroke of 1/8� (3mm) and a smaller 5� pad, the ETS EC 125/3 is great for verticaland overhead surfaces, as well as general purpose sanding. Featuring a compact design, ergonomic grip and an electronic vibration control system, this tool allows for less fatigue and makes it more comfortable to work.

Equipped with the EC-TEC� Brushless Motor, these lowprofile, long-life and low-vibration sanders can run all day with multiple shifts. Available in a fine 1/8� (3mm) stroke or a broader 3/16� (5 mm stroke), these sanders use a larger 6� pad and offer the performance of an air sander without the bulk of an air system. Not to mention, their compact design and ergonomic grip save time and allow for less fatigue � making them the ultimate high-demand sanding tools.

Equipped with the EC-TEC� Brushless Motor, these lowprofile, long-life and low-vibration sanders can run all day with multiple shifts. Available in a fine 1/8� (3mm) stroke or a broader 3/16� (5 mm stroke), these sanders use a larger 6� pad and offer the performance of an air sander without the bulk of an air system. Not to mention, their compact design and ergonomic grip save time and allow for less fatigue � making them the ultimate high-demand sanding tools.

Functions Stores any abrasive in a dedicated space, clearly organised, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand. With insert for abrasives dia. 6" (150 mm) ...

FestoolFine-tooth Saw Blade 495377 (TS 55)160 mm x 48 T w/ 20 mm Bore ATBWood/Soft PlasticsCross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB blade.

Festool Fine-tooth Saw Blade 495381 (TS 75)210 mm x 52 T w/ 30 mm Bore ATBWood/Soft PlasticsCross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB blade.

Festool Fine-tooth Saw Blade 495387 (Kapex 120)260 mm x 80 T w/ 30 mm Bore ATBWood/Soft PlasticsCross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB blade.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Kapex KS 120 REB Sliding Compound Miter Saw Contains 60T Carbide Saw (495388) Fine Bevel Adjustment Capacity to rival 12" saws Dual-line lasers Compact and Lightweight

Kapex UG Cart SetIncrease portability and functionality on the jobsite or in the workshop.Equipped with large wheels, the UG easily navigates the work area and breaks down quickly and easily for transport.Consists of Kapex Mobile Base (497351), Left Extension (497353), Right Extension (497352).

OF 1400 EQ RouterOur most versatile router packs 1400 watts into less than 10 lbs. it's got enough power for most routing tasks, yet it's small enough to allow precise control.Standard Package includes:1/4" Collet8 mm Collet1/2" ColletChip Catcher Dust Extraction HoodGuide RodsStandard U.S. Guide Bushing AdapterPlug-it Power CordSYS 4TL

OF 2200 EB RouterYou might confuse it for a portable shaper. In fact, its our most powerful router, easily capable of plunging into 8/4 hardwoods or making 1/2" grooves in a single pass. It's easy to control and perfect for jobsite or shop.

Festool Panther Saw Blade 495378 (TS 75)210 mm x 16 T w/ 30 mm Bore ATBWood/Soft PlasticsFast-cutting rip blade with aggressive hook angle and deep gullets. Carbide-tipped ATB blade.

Festool Panther Saw Blade 496305 (TS 55)160 mm x 12 T w/ 20 mm Bore ATBWood/Soft PlasticsFast-cutting rip blade with aggressive hook angle and deep gullets. Carbide-tipped ATB blade.

Call to order Today! Planex LHS 2 225 Drywall Sander 575994 Three good reasons to buy: Optimum illumination during sandingThe LED light ring reveals unevenness on the surface duringsanding – eliminating the need for time-consuming reworking. Perfect surface qualityThe random orbit sanding motion produces a perfectsurface quality with no grooves. Adjustable suction powerThe adjustable suction power means that thePLANEX holds its own weight against the walland ceiling – helps to reduce the load...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Take versatility to new levels with a compact, four-machines-in-one unit. The RO 90 excels as an aggressive rotary sander, a random orbit finish sander and even as a rotary polisher. With a twist of the dial and tool-less pad changeover, the RO 90 is the only Rotex that also functions as a detail sander.

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Festool Solid Surface/Laminate Saw Blade 495382 (TS 75)210 mm x 60 T w/ 30 mm Bore TCGPlasticLong-lasting, high-cut quality blade, ideal for laminate flooring and solid surface counter top materials. Carbide-tipped TCG blade.

Festool Solid Surface/Laminate Saw Blade 495386 (Kapex 120)260 mm x 64 T w/ 30 mm Bore MATBPlasticLong-lasting, high-cut quality blade, ideal for laminate flooring and solid surface counter top materials. Carbide-tipped TCG blade.

Festool Solid Surface/Laminate Saw Blade 496309 (TS 55)160 mm x 48 T w/ 20 mm Bore TCGPlasticLong-lasting, high-cut quality blade, ideal for laminate flooring and solid surface counter top materials. Carbide-tipped TCG blade.

FestoolStandard Saw Blade 495379 (TS 75)210 mm x 18 T w/ 30 mm Bore ATB Wood/ Soft PlasticsCoarse-cutting rip blade for use with building panels, wood and soft plastics. Carbide-tipped ATB blade.

TID 18 Cordless Impact Driver Compact Set 576480Includes: Belt clip, (2) BP 18 Li 4.0 HPC-ASI battery pack, Rapid charger TCL, Systainer SYS3 M 187.Strengths & BenefitsRobust: Long lasing quality components, fully covered thanks to the comprehensive support provided by Festool Service.Maximum Power: Thanks to the extremely powerful, brushless, and therefor long lasting, new generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws.Kickback free hammer...

Festool Universal Saw Blade 495380 (TS 75)210 mm x 36 T w/ 30 mm Bore ATBWood/Soft PlasticsClean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB blade.

FestoolUniversal Saw Blade 495388 (Kapex 120)260 mm x 60 T w/ 30 mm Bore ATBWood/Soft PlasticClean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB blade.

Festool Universal Saw Blade 496304 (TS 55)160 mm x 28 T w/ 20 mm Bore ATBWood/Soft PlasticsClean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB blade.

For repeat hole spacing between 3-7/8" and 8-1/16" (100 mm and 205 mm). The Cross Stop enablesprecise and repeatable mortise placement across the surface or edge of a work piece. Increaseefficiency by eliminating the need for witness or scribe marks. Adjustable-spaced pins registeragainst the starting edge of the material or in the previous mortise for accurate and consistentspacing of mortises.

Functions Cordless freedom with corded suction performance; in a Systainer. Cordless freedom with maximum portability. Systainer on the outside, cordless dust extractor on the inside. Our Systainer extractor offers maximum performance and independence with minimal weight – perfect for transporting and carrying. This makes it the ideal partner for smaller tasks and punch list work. It enables virtually dust-free work without the need for a power outlet and excels with maximum suction power...

IncludesCyclone SystainerVAB-20 collection containerSystainer panconnecting hoseplastic linercontainer lidFunctionsLess time changing Filter Bags. More time for doing what matters.For craftsmen who work with large volumes of dust and debris, the CT CYCLONE pre-separator is the simplest answer for increasing the efficiency of your CT Dust Extractor and minimizing its lifetime cost of ownership — all within a compact solution that fits seamlessly into the Festool mobility system. Compliant with...

Functions Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking...

Includescable holder Functions The handle makes CT transport easier and can be lowered when not in use. The handle also provides space-saving storage options for cleaning accessories as well as a cord wrap for easy access. handle can be lowered when not in usemade of steel and aluminium pipespractical storage of cleaning accessories (hand tube, extension pipes and floor nozzle) for CT MINI, CT MINI I, CT MIDI and CT MIDI I manufactured from 2019 onwards, as well as CT 15 and CT 25not...

Includes table with perforated top and foldaway legs Functions MFT/3 — The evolution of the workbench Redesigned for 2008, the height has been adjusted to make work more comfortable. New V-groove channels make adjustments both faster and easier. Both the fence and the miter gauge have been redesigned for better stability and more accurate results. The MFT/3 has 85% more working area than the older MFT 800, and is 15% lighter than the MFT 1080. Even though the MFT/3 has many improvements, we...

Functions Our masterpiece. Decisively improved. Now twice as fast. Millions of saws do not lie: The TS has always stood out with its absolute precision cuts, maximum power and extreme durability. The usual reliability remains – but the working speed is unprecedented: The TS 55 now saws at up to twice the speed. In addition, the new generation of cutting blades guarantees perfect cutting quality with maximum cutting performance. With accessories, such as guide rails and the angle stop, or...

for Systainer³ M, T-LOC and ClassicFunctionsCustom build a storage solution that fits your needs. With individual drawer and slide mechanisms, featuring full-slide capability, each Systainer lid can be fully opened. Designed to work with 32 mm systems for layout and construction. Compatible with Classic or T-LOC SystainerS. Maximum load 44 lbs. SystainerS sold separately, includes five (5) drawers.Box construction should be 16-13/16" (427mm) wide by 14-31/32" (380 mm) or more deep, with a...

Includescurved hand tube D 36 HR-K ASStandard Floor Nozzleextension pipes D 36 VR-K AScrevice nozzle, D 36 FD-300Suction BrushSystainer SYS3 M 137FunctionsCompact, portable, and fully equipped.Compact, durable, convenient, and lightweight set that is easy to transport as well as being ideal for quick cleanup on jobsites and in workshops.for all cleaning tasks in narrow spaces, on surfaces and on the groundfor all CTs ...

Functions Smooth, light, and flexible - for effortless extraction. The Festool suction hose: Light and flexible – with a smooth exterior for significantly improved handling, a longer service life, and a tapered design for increased suction power. The CLEANTEC connecting sleeve ensures a strong attachment to the tool – keeping the hose securely connected for optimum dust extraction. Robust, smooth outer skin prevents the suction hose from becoming caughtInternal, extremely flexible suction hose...

Functions The cart with intelligent added extras: All four large wheels can be rotated by 360°. This makes the cart an agile set of wheels – ideal for construction sites and workshops. Two of the four wheels are fitted with locking brakes. Thanks to the coupling, the Systainer³ and Systainer T-LOC units can be secured in place with the central control element. Other objects and materials can also be easily transported on the flat surface and secured using the strap feedthroughs. The four...

Functions Like adding a drawer to the bottom of a Systainer SYS 2 TL, the SYS-Combi expands the range of customizable and efficient storage and mobility solutions. Customize your storage needs by putting a tool and related accessories in one Systainer. Tools can store in the top “Systainer” portion, and related accessories and consumables (abrasive paper, blades, DOMINO tenons, etc) can be organized and stored in the bottom drawer. The large drawer (with dividers) provides quick access to...

compatible with Rotex 125, ETS 125, ETS EC 125 Includes 10x Abrasive GRANAT D125 P6025x Abrasive GRANAT D125 P8025x Abrasive GRANAT D125 P12020x Abrasive GRANAT D125 P18020x Abrasive GRANAT D125 P220Interface-PadSystainer SYS3 M 112 Functions Ensure that you have the right abrasive for the job with the Systainer Abrasive Set. A set for the 5" sanders, equipped with Granat abrasives in a range of grits from 60 – 220 and including an interface pad. Neatly stored in the Systainer SYS 3 M 112,...

Includes cover for label field Functions Systainer³ combines workshop and construction site. without tool insertproven systainer storage system

Includes 2x T-BAG M T1 bagT-BAG M T2 bagT-BAG M T3 bagT-BAG M T4 bagShoulder Strap Functions A Systainer-compatible Tool Bag. Work more efficiently with the Systainer³ ToolBag. Organize, store, protect, and easily transport the hand tools and accessories that are needed for every job. Made with robust and durable material, and with a sturdy Systainer³ interface, the ToolBag offers convenient storage space for numerous tools and accessories. The inner pockets can be arranged in a custom manner...