Routers

Includes dia. 5/16" clamping collet (8 mm)1.5 Degree Horizontal Base Unit for MFK Routerextraction hoodcollet wrench, WAF 19plug it-power cable (4 m)Systainer SYS3 M 187 Functions Precision and flexibility in a trim router With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Packed with...

Includes Light module LM-OF 1010 Rguide rail adapterguide rodschip catcherdia. 1/4" clamping collet (6.35 mm)dia. 5/16" clamping collet (8 mm)collet wrench, WAF 19plug it-power cable (4 m)Systainer SYS3 M 237 Functions Lights on for precise cutting results. Extremely versatile. Extremely precise. Extremely easy to handle. Whether used on the guide rail or off, the OF 1010 R router is the ideal tool for fine routing work. Thanks to its size and low weight, it can be accurately guided along...

Includes chip catcherdia. 1/4" clamping collet (6.35 mm)dia. 5/16" clamping collet (8 mm)dia. 1/2" clamping collet (12.7 mm)open ended spanner, WAF 24plug it-power cable (4 m)Systainer SYS3 M 337 Functions Our most versatile router The OF 1400 Router provides 1400 watts of power in a machine that weighs less than 10 lbs. It accepts 1/2", 1/4" or 8 mm bits. With enough power to handle most routing tasks and small enough to be extremely maneuverable, the OF 1400 is the one router every...

Includes dia. 1/2" clamping collet (12.7 mm)chip catcheropen ended spanner, WAF 24Systainer SYS3 M 337 Functions You might even think it is a portable shaper The OF 2200 is our most powerful router. It can easily plunge into 8/4 hard maple and make a 1/2" groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a...

For OF 2200Includesguide rail adapterparallel edge guideguide rodscopying ring dia. 1/2" (12,7 mm)copying ring dia. 3/4" (19.05 mm)copying ring dia. 1" (25.4 mm)copying ring dia. 1-3/8" (34.93 mm)base runner D36base runner for copying ringsextensionSystainer SYS3 M 237FunctionsIncludes parallel edge guide, guide stop, guide rods, table widener base, small bore base, template guide base, offset base for guide rail, & imperial template guide bushings. ...

For OF 1010FunctionsReplacement Guide Stop for use with the OF 1010 Router and FS Guide Rail System. Maximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The Guide Stop attaches quickly and easily using two rods included in the scope of delivery of the OF 1010 router.Adapt the Festool OF 1010 Router for use with the FS Guide Rail System for...

For OF 1400FunctionsMaximize the versatility of your Festool Router and Guide Rail System! Use the Guide Stop to adapt the Festool OF 1400 Router for use with the FS Guide Rail System for perfectly guided, straight routing. The OF 1400 Guide Stop features fine-adjustment controls, allowing you to precisely adjust the distance to cut in increments of 1/10mm. Also included with the Guide Stop is a support foot to levels the router to the surface of the guide rail, ensuring smooth, accurate...

Includes dia. 5/16" clamping collet (8 mm)collet wrench, WAF 19plug it-power cable (4 m)Systainer SYS3 M 187 Functions The perfect edge demands the perfect finishing touch and the MFK 700 helps deliver those results through precision depth control and smooth running operation. Form edges on nearly any type of material thanks to the variable speed control which helps to prevent melting and burning of sensitive materials like PVC and exotic woods. For more information, visit our CONTURO website...

For OF 2200Includesguide rail adapterparallel edge guideguide rodscopying ring dia. 21/32" (17 mm)copying ring dia. 15/16" (24 mm)copying ring dia. 1-1/16" (27 mm)copying ring dia. 1-1/2" (40 mm)base runner D36base runner for copying ringsextensionSystainer SYS3 M 237Functionsall OF 2200 accessories clearly arranged and within reach in a Systainer ...

For OF 1400FunctionsWhen used with the Festool OF 1400 Router, the Parallel Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the material edge in increments of 1/10mm for ultra-precise routing. Dust extraction hood enables ultra-efficient dust extraction, saving valuable cleanup time. The Edge Guide is constructed from...

For OF 1010FunctionsQuick and precise adjustment when using router with guide stop or edging plate.Allows for precise adjustment of guide stop or edging plateSave time not having to make adjustments to routerAccuracy avoids waste of materialCuts with guide stop are perfectly straighteasy-to-read scale

For OF 1400FunctionsReplacement.Improves dust extraction while edge routingSave on clean up timeKeep workspace cleanToolless attachment to or removal from router baseFor sideway extraction

For OF 2200FunctionsIncludes guide stop and accessory base plate with offset for use with OF 2200 and FS guide rails.Expand functionality of OF 2200 routerGuided cuts are perfectly straightAllows to start and end the cut anywhere in the materialAccuracy avoids waste of materialWithout guide rods ST-OF 2200/2With fine adjustment and support plate for router ...

For MFK 700FunctionsDesigned for straight routing in the horizontal configuration.Expand functionality of MFK 700 routerFine adjustment allows precise trimming of edge bandingAccuracy avoids waste of materialAllows for use of bearing-less bits in conjunction with feeler bearing set mounted to MFK 700 routerFor routing accurate angles

For OF 1400FunctionsAccessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit.Allows for faster and easier corner routingEnables more precise corner routingAvoids risk of base opening catching on the cornerAdditional support and stability, especially with small diameter bitsHard-fibre base runner with 3/4" (20 mm) centre boreReduces the opening of the router to the cutter diameterMax. cutter...

For OF 2200FunctionsWhen used with the Festool OF 2200 Router, the Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the edge in increments of 1/10mm for ultra-precise routing. The Edge Guide is constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service...

For OF 1010FunctionsIncludes Fine Adjustment for OF 1010 EQ Edge Guide.Allows for finer adjustments when using the Edge Guide router attachmentFor use with OF 1010 EQ RouterFor fast and dimensionally accurate adjustment on the parallel side fenceCan be retrofittedDelivered without side stop and guide rods

For MFK 700Includestarnishing padextraction hoodFunctionsReplacement for the slight inclination of the base, which helps prevent damage to the workpiece surface.Save time not having to file the edgeFine adjustment allows precise trimming of edge bandingAccuracy avoids waste of materialAllows for use of bearing-less bits in conjunction with feeler bearing set mounted to MFK 700 routerlow-dust routing thanks to extraction hood ...

For OF 1400FunctionsOversized, heavy-duty base plate with integrated dust hood.Expand functionality of OF 1400 router since larger hole diameter of table widener allows use of larger bitsGreater base support avoids waste of materialAllows precise edge routing without wobbleIntegrated rotating chip catcher improves dust extractionFor sideway extractionRunning pad with support extensionrunning pad with chip deflectorvery good sliding propertiesthe integrated magnets hold the dust collector...

For OF 1010FunctionsFor sideway extractioncan be rotated by 360°Max. aperture 1-1/2" (37 mm)

for MFK/OFK 700, OF 900, OF 1000, OF 1010, OF 1010 R, KFFunctionsClamping collet 1/4", SZ-D6,35-OF1010Faster and easier bit changes with one wrench.Works on the OF1010With locking nutFor cutter shank dia. 1/4"

For OF 2200IncludesQty. in pack: 2.00 UnitsFunctionsUse Guide Rods to attach Parallel Edge Guide or Guide Stop to the OF 2200 Router. Set of 2.Guided cuts are perfectly straightUtilize same rods for guide stop and edge guideWork precisely to avoid waste of material and reworkMade in GermanyGuide rods for side and guide stops 2 pieces ...

For OF 2200FunctionsAccessory base with dust channels for use with template guides.Improves dust extractionSave on clean up timeAllows for more precise routing, especially on cornersAvoids risk of base opening catching on the cornerfor copying rings D 12.7–36 mmWith openings for optimised extraction

For OF 1010not compatible with OF 1010 RFunctionsCustomize the solid base piece hole diameter with a plunge bit to meet your needs. Provides support across the entire surface of the router base. Ideal for working with smaller diameter bits especially for greater support on outside corners. Does not have the center bore.Customize base runner to your specific needsAllows for faster and easier corner routingEnables more precise corner routingAvoids risk of base opening catching on the cornerhard...

For the OF 1400, OF 2000, OF 2200FunctionsFaster and easier bit changes with one wrench.Works on the Festool OF2200 and OF2000 (24mm Wrench)Dramatically reduces bit slippingMaintain center line and higher precission cuts over the life of the colletFor router shaft dia. 1/4“dustproof clamping colletsopen-ended spanner width 24 mm

for MFK/OFK 700, OF 900, OF 1000, OF 1010, OF 1010 R, KFFunctionsClamping collet 8 mm, SZ-D8/OF1010Faster and easier bit changes with one wrench.Works on the OF1010With locking nutFor router shank dia. 5/16"

For OF 2200FunctionsAccessory base with dust channels for use with template guides.Improves dust extractionSave on clean up timeAllows for more precise routing, especially on cornersAvoids risk of base opening catching on the cornerfor copying rings D 12.7–36 mmWith openings for optimised extraction

For the OF 1400, OF 2000, OF 2200FunctionsFaster and easier bit changes with one wrench.Works on the Festool OF2200 and OF2000 (24mm Wrench)Dramatically reduces bit slippingMaintain center line and higher precission cuts over the life of the colletFor router shank dia. 5/16"dustproof clamping colletsopen-ended spanner width 24 mm

for OF 1010, OF 1010 R, OFK 700, MFK 700FunctionsFlush trim cutter with ball bearing for edge trimmingFeaturing robust 8mm shank12x12mm reversible blade can be used 4 timesFor use with OF 1010 and MFK 700 EQ/B routersFeaturing robust 8mm shank1/2" x 1/2" (12 x 12 mm) reversible carbide blade is replaceableAlpha 0.00 °NL 1/2" (12 mm)D 3/4" (19 mm)GL 2" (52 mm) ...

For OF 1010FunctionsThe Trammel Unit for the Festool OF 1010 Router allows you to rout precise circles and decorative curves from 6-1/32 inches up to 29-7/8 inches in diameter. Anchored in the center with the included trammel point, and attaches simply and securely to the router using thumbscrews.Cut perfect circles and curvesDiameter of circle can range from 6-1/32 inches up to 29-7/8 inchesOffers the flexibility to start and end cuts anywhere in the materialWork precisely to avoid waste of...

For the OF 1400, OF 2000, OF 2200FunctionsFaster and easier bit changes with one wrench.Works on the Festool OF2200 and OF2000 (24mm Wrench)Dramatically reduces bit slippingMaintain center line and higher precission cuts over the life of the colletFor router shaft dia. 1/2“dustproof clamping colletsopen-ended spanner width 24 mm

for various reversible blade cuttersIncludes2x oval head screwT15 TX spanner4x reversible bladeFunctionsReversible cutter for 491084, HW-WP 12x12x1,5; Qty. 4

For OF 2200FunctionsOversized, heavy-duty base plate with integrated dust hood.Expand functionality of OF 2200 router since larger hole diameter of table widener allows use of larger bitsAllows precise edge routing without wobbleGreater base support avoids waste of materialIncreases safety during edge routingSupport widener for safe guidance of the router at workpiece edges ...

for OF 1010, OF 1010 R, OFK 700, MFK 700Functionsfor flush trimming of edgescarbide bladesfor edges up to 15 mm in thicknessGL 1-3/4" (46 mm)D 3/4" (19 mm)NL 9/16" (16 mm)

For OF 1400FunctionsCopying ring, KR-D 24 mm (.944"), OF 1400Copying ring, KR-D 24 mm (.944"), OF 1400Tool Less quick change of template guidessuitable for cutters up to 19 mm in diameterD 1" (24 mm)d 7/8" (21 mm)

for OF 1010, OF 1010 R, OFK 700, MFK 700FunctionsHW Replaceable Knife, Chamfer Bit with BearingOptimised bearing mount suitable for 1/4“ ball bearing guide or no ball bearing guide1/2" x 1/2" (12 x 12 mm) reversible carbide blade is replaceableAlpha 45.00 °D 1-1/16" (27 mm)GL 2-1/8" (55 mm)NL 5/16" (8 mm)

For OF 1010FunctionsCopying ring, KR-D10.8mm (.425"), dia 9mm (.354"), OF1010the copying ring can be precisely centred with centring mandrel 492187D 13/32" (10.8 mm)d 5/16" (7.8 mm)

For OF 1400FunctionsCopying ring, KR-D 27mm (1.062"), OF 1400Tool Less quick change of template guidessuitable for cutters up to 22 mm in diameterD 1-1/16" (27 mm)d 1" (24 mm)

For OF 1010FunctionsCopying ring, KR-D13.8mm (.543"), dia 11mm (.433"), OF1010the copying ring can be precisely centred with centring mandrel 492187D 9/16" (13.8 mm)d 3/8" (10.8 mm)

For OF 1400FunctionsTemplate Guide, 30 mm OD / 27 mm IDFestool OF 1400 copying rings 30mm OD / 27mm IDTool Less quick change of template guidessuitable for cutters up to 25 mm in diameterD 1-3/16" (30 mm)d 1-1/16 (27 mm)

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200FunctionsChamfer/edge trimming bit, HW D24, 45 degree, shank dia. .31" (8mm)HW bladesplastic-coated ball bearingGL 2-1/8" (54 mm)NL 3/8" (11 mm)D 1" (24 mm)

For OF 2200FunctionsMagnetics for self centering and easy insertionTool Less quick change of template guidesVariety of metric and imperial template guides available for the OF 2200size of copying ring in inchesD 1/2" (12.7 mm)d 3/8" (10 mm)

For OF 1010FunctionsCopying ring, KR-D17mm (.669"), dia 15mm (.590"), OF1010the copying ring can be precisely centred with centring mandrel 492187D 5/8" (17 mm)d 1/2" (14 mm)

For OF 1400FunctionsCopying ring, KR-D 40 mm (1.575"), OF 1400Festool OF 1400 copying rings 40mm OD / 37mm IDTool Less quick change of template guidessuitable for cutters up to 35 mm in diameterD 1-1/2" (40 mm)d 1-1/2" (37 mm)

for OF 1010, OF 1010 R, OFK 700, MFK 700FunctionsOptimised bearing mount suitable for 1/4“ ball bearing guide or no ball bearing guideAlpha 30.00 °GL 2" (50 mm)NL 3/8" (11 mm)D 1" (25 mm)

For OF 2200FunctionsMagnetics for self centering and easy insertionTool Less quick change of template guidesVariety of metric and imperial template guides available for the OF 2200size of copying ring in inchesD 3/4" (19.05 mm)d 5/8" (17 mm)

For OF 1010FunctionsCopying ring, KR-D24mm (.944"), dia 21mm (.826"), OF1010the copying ring can be precisely centred with centring mandrel 492187D 1" (24 mm)d 7/8" (21 mm)

for OF 1010, OF 1010 R, OFK 700, MFK 700FunctionsOptimised bearing mount suitable for 1/4“ ball bearing guide or no ball bearing guideAlpha 45.00 °GL 1-7/8" (48 mm)NL 1/4" (7 mm)D 1" (26 mm)