DF 700

Includes DOMINO DF 700 XL 15/32" (12mm) cutterSupport BracketTrim STOPcross Stopdowel boxopen ended spanner, WAF 12plug it-power cable (4 m)Systainer SYS3 M 437 Functions Stationary machines like hollow chisel mortises and slot mortises occupy a large amount of floor space in your shop, are expensive to purchase, require a lot of setup and maintenance, and force you to bring the material to the tool. Festool has taken the revolutionary concept of the DOMINO joiner and made it larger with the...

For DF 500 and DF 700FunctionsFor repeat hole spacing between 3-7/8" and 8-1/16" (100mm and 205mm). The DOMINO Cross Stop enables precise and repeatable mortise placement across the surface or edge of a work piece. Designed for material of any length, the Cross Stop increases efficiency by eliminating the need for witness or scribe marks. Adjustable-spaced pins register against the starting edge of the material or in the previous mortise for accurate and consistent spacing of mortises....

For DF 500 and DF 700FunctionsThe DOMINO Trim Stop enables precise and repeatable mortise placement in ends of narrow workpieces, such as rails or spindles. Designed for material between 7/8 inch and 2-3/4 inch (22 mm and 70 mm) in width. Sides adjust independently for centered or off-center mortising. Attaches quickly and easily to the Festool DOMINO Joiner without the need for tools.Holds narrow workpieces in place for precise and repeatable mortise placementSides adjust independently for...

For DF 500 and DF 700FunctionsDOMINO Hand Rail Fence for securely joining round workpieces such as handrails. For centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameter. Attaches quickly and easily to the DOMINO Joiner without the need for tools.Centers DOMINO machine on round workpieces such as handrailsTool-less attachment to Festool DOMINO JoinerFor centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameterMade in GermanyFor precise routing of round poles...

For DF 500 and DF 700FunctionsReplacement part for DOMINO Joiners. The Base Support Bracket now includes integrated index stops, providing accurate reference points for mortising near the edge of a workpiece. This is particularly useful for narrow workpieces. When using the flip stops, the center of the cut is 20mm (25/32") from the edge versus 37mm (1-15/32") without. The flip stops offer optimal flexibility when using the new 4mm DOMINO cutter and tenons.Provides additional support below the...

For DF 700Functions8mm cutter for the DOMINO XL DF 700 Joiner for use with 8mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 8mm tenonsRouting tools with threaded supports for the DOMINO...

For DF 700Functions10mm cutter for the DOMINO XL DF 700 Joiner for use with 10mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 10mm tenonsRouting tools with threaded supports for the...

For DF 700Functions12mm cutter for the DOMINO XL DF 700 Joiner for use with 12mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 12mm tenonsRouting tools with threaded supports for the...

For DF 700Functions14mm cutter for the DOMINO XL DF 700 Joiner for use with 14mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 14mm tenonsRouting tools with threaded supports for the...