Bits & Accessories

for TID 18 cordless impact screwdriverIncludesbit holder BH 52PH 2 bitPH 3TX 25 bitTX 30 bitbit SQ 2Functionsextra-impact-resistant bit assortment6-pc.in the BitBOXLength 1" (25 mm)

for TID 18 cordless impact screwdriverIncludeslockable bit holder 1/4"PH 2 bitPH 3TX 25 bitTX 30 bitbit SQ 2Functionsextra-impact-resistant bit assortment6-pc.in the BitBOXLength 1" (25 mm)

for TID 18 cordless impact screwdriverIncludesPH 2 bitPH 3TX 20 bitTX 25 bitTX 30 bitbit SQ 2Functionsextra-impact-resistant bit assortment6-pc.in bit checkLength 2" (50 mm)

for CXS/TXS 12, CXS/TXS 18, TPC 18/4, TDC 18/4, C 18 and T 18 with FastFix support (not for CXS/TXS)FunctionsThe Right Angle attachment connects directly to the output shaft of compatible Festool drills for right angle drilling and driving.Quick angle adjustment simply by rotating the green ring without removing from the drillfor right-angle drilling and driving in narrow placesHolder FastFixMax. screw size for softwood 3/8" x 11-13/16" (10 x 300 mm) ...

for all Festool cordless drills, cordless percussion drills, drills (except DR 20/DRP 20) and percussion drills with FastFix tool receptionIncludesstop sleeves dia. 5/8" + 3/4" (17 mm + 23 mm)PH 2 bitsocket wrench, size 8FunctionsFor use with Depth Stop Attachment 769126. Equipped with 1/4" hex shank and 8 mm socket end for use with self-drilling screws.with exchangeable stop sleevesideal for façade and patio screwsHolder FastFixMax. screw size for softwood 6 x 100 mm ...

for all Festool cordless drills, cordless percussion drills, drills (except DR 20/DRP 20) and percussion drills with FastFix tool receptionFunctionsFastFix Adapter for use with PDC, C, and T drills. Equipped with 3/8" socket post.For holding socket with 3/8" squareHolder FastFix

for all Festool cordless drills, cordless percussion drills, drills (except DR 20/DRP 20) and percussion drills with FastFix tool receptionFunctionsimpact-resistant design for use with masonry drillswith locking design – helps to prevent accidental release of the bitall-metal knurled gripping surfaceUsageMain applicationsKeyless chuckFastFix fixtureWith locking deviceRobust designHolder FastFixClamping range 1/16" (1.5 mm) - 1/2" (13 mm) ...

for CXS/TXS 12, CXS/TXS 18, TPC 18/4, TDC 18/4, C 18 and T 18 with FastFix support (not for CXS/TXS)FunctionsThe Eccentric Chuck attachment connects directly to the output shaft of compatible Festool drills for drilling and driving near adjacent surfaces.Quick angle adjustment simply by rotating the green ring without removing from the drillMax. screw size for softwood 1/4" x 11-13/16" (6 x 100 mm) ...

for BHC 18, KHC 18, PDC 18, TPC 18/4, PD 20 and CT/CTL/CTM mobile dust extractorsFunctionsFor drilling in floors, walls and ceilings up to a maximum of 12mm (1/2") to reduce dust or debris. Patented dual-chamber system for clean drilling and a secure hold. Foam rubber pad for a secure hold on uneven surfaces. Flexible joint piece for moving hose to perfect position. Drill sleeve made from nickel-plated steel. Compatible with all standard industrial and domestic vacuum cleaners.Adapter with...

for all Festool cordless drills, cordless percussion drills, drills (except DR 20/DRP 20) and percussion drills with FastFix tool receptionFunctionsSwitch between drill and driving functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Festool FastFix based Centrotec Chuck is extremely light weight and compact. This quick-release chuck provides two points of contact for Centrotec bits, allowing them to extend directly into...

For AF 55-DWP/DWCIncludesQty. in pack: 3.00 UnitsFunctionsElongated Phillips driver bit for use with magazine attachment. Compatible with a majority of collated screws for drywall.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact designCentrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly...

For DWCFunctionsBit holder equipped with ¼” drive compatibility. For use with the depth stop cone.Compatible with the DWC 18 Drywall Gun.

For AF 55-DWP/DWCIncludesQty. in pack: 1000.00 UnitsFunctionsFine thread screws for fastening in metal studs and substructures. Collated strips. Available in 25 mm (1”) and 35 mm (1-38”) lengths. 1,000 per box.Compatible with the DWC 18 Drywall Gun.Magazine-loaded, 1000 pc. fine threadLength 1" (25 mm)Diameter 5/32" (3.9 mm)Size PH 2 ...

For AF 55-DWP/DWCIncludesQty. in pack: 1000.00 UnitsFunctionsCompatible with the DWC 18 Drywall Gun.Magazine-loaded, 1000 pc. coarse threadLength 1-3/8" (35 mm)Diameter 5/32" (3.9 mm)Size PH 2

For AF 55-DWP/DWCIncludesQty. in pack: 1000.00 UnitsFunctionsCompatible with the DWC 18 Drywall Gun.Magazine-loaded, 1000 pc. coarse threadLength 1-3/4" (45 mm)Diameter 5/32" (3.9 mm)Size PH 2

for BHC 18, KHC 18, RHP 18, CHP 26FunctionsAdapt your hammer drill to Festool’s Centrotec chuck and its accessories with this handy adapter. The Centrotec chuck is a lightweight, compact, and quick-releasing chuck that provides two points of contact for bits and accessories. When using Centrotec accessories the precision-milled sleeve acts like bushing, which prevents wobble.Adapts SDS drive hammer drills to the Centrotec chuck and its accessoriesFor holding a CENTROTEC tool chuck ...

for bits and CENTROTEC tools for drilling and screwdrivingFunctionsThe Hand Driver expands the versatility of the entire Centrotec range, providing a simple solution for all hand driving tasks.Compatible with Festool Centrotec bits and select accessoriesProvides quick change bit system for hand drivingCentrotec chuck and bit(s) sold separately.interface for 1/4" bits and CENTROTEC tools ...

suitable for drillsFunctionsConvert any non-Festool drill for use with the Centrotec System using this adapter which fits into a standard keyless chuck.Provides a simple way to make any drill compatible with Festool Centrotec bits and select accessoriesStandard 5/16-inch hex shank inserts into any standard drill chuckCentrotec chuck and bit(s) sold separately.enables drills to fit FastFix attachments such as tool chuck WH-CE CENTROTEC ...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsThis Centrotec compatible socket adapter accepts all 1/4" sockets extending the capabilities of your Festool cordless drill.Compatible with Festool Centrotec cordless drillsAccepts standard 1/4-inch socketsBall lock for positive connectionFor plug-in bitsHolder 1/4"Length 2" (50 mm) ...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsThis Centrotec compatible socket adapter accepts all 3/8" sockets extending the capabilities of your Festool cordless drill.Compatible with Festool Centrotec cordless drillsAccepts standard 3/8-inch socketsBall lock for positive connectionFor plug-in bitsHolder 3/8"Length 2-3/4" (70 mm) ...

for CXS 12FunctionsSmall and compact for the CXS 12.Specially developed for the new-generation CXS 12 cordless drill: The battery is a compact, slide-type battery particularly light and compact, and ensures optimal balance and weight distribution. Compact and powerful, ideal for typical assembly applications – when you have to work either in tight spaces or overhead. Compatible with all chargers in the Festool 18-volt cordless range. Fully covered by Festool warranty service.Specially for the...

for CXS 12 and CXS/TXS 18 (excluding previous models)FunctionsClose-quarters drilling and driving.The right-angle adapter for the CXS 18 and TXS 18 compact drill-drivers provides drilling and driving applications in tight spaces. The FastFix interface with direct bit holder also allows use of the WH-CE CENTROTEC tool chuck and the BF-FX 10 keyless chuck.Simple attachingFastFix support with 1/4" bit holder for an overall compact lengthMaximum flexibility due to compatibility with the WH-CE...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsCentrotec Pilotless Countersink, D2-8mm. Precision ground. Also compatible with standard 3-jawed chuck.Save time changing between countersink and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact designCentrotec bits extend directly into the drill spindle so they serve as an...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsCentrotec Pilotless Countersink, D5-15mm. Precision ground. Also compatible with standard 3-jawed chuck.Save time changing between countersink and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact designCentrotec bits extend directly into the drill spindle so they serve as an...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsCentrotec 5mm drill bit with depth stop. Replacement bit available (491794).Save money by replacing just the bit and not the entire assemblySave time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the lightweight Centrotec chuck and decrease drilling/driving clearance with the compact designCentrotec bits extend directly into the drill...

For drill bit with depth stopFunctionsReplacement 5mm bit for Centrotec drill bit with depth stop (492520).Save money by only having to replace the bit and not the entire assemblySave time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the lightweight Centrotec chuck and decrease drilling/driving clearance with the compact designCentrotec bits extend directly into the drill spindle so they serve as an extension of the motor, significantly...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsAdustable countersink drill bit with a free spinning depth stop for use with the Centrotec system. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the...

drill countersink BSTA HS D 3.5 CE (item no. 492523)IncludesQty. in pack: 5.00 UnitsFunctionsReplacement Drill Bit For Countersink With Depth Stop (492523), 3.5mm. Includes 5 drill bits.5-Pack of 3.5mm replacement bitsManufactured from High Speed Steel for longer service lifeSpur-less design with beveled chamfers for clean, efficient drillingSharpened flutes keep entry and exit holes clean and precise while reducing the potential for burning.Diameter 3/16" (3.5 mm) ...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsAdustable countersink drill bit with a free spinning depth stop for use with the Centrotec system. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the...

drill countersink BSTA HS D 4.5 CE (item no. 492524)IncludesQty. in pack: 5.00 UnitsFunctionsReplacement Bit (5 pieces)Diameter 3/16" (4.5 mm)

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)Functions5mm Centrotec self-centering drill bit. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ½ pound, and the length is...

for ZB HS D 5 EURO CE centring bitDiameter 7/32" (5 mm)

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)FunctionsAllows you to quickly and easily drive hooks with your cordless drill. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ½...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)not suitable for TID 18Functions2 3/8in Magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)Functions6in Magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)Length 2-1/3" (60 mm)

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Phillips bit 1-100 mm. Centrotec Phillips bits with precision milled long shaft. Also compatible with standard or keyless chuck. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Phillips bit 2-100 mm. Centrotec Phillips bits with precision milled long shaft. Also compatible with standard or keyless chuck. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Phillips bit 3-100 mm. Centrotec Phillips bits with precision milled long shaft. Also compatible with standard or keyless chuck. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Phillips bit 1-50 mm. Centrotec Phillips bits with precision milled long shaft. Also compatible with standard or keyless chuck. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Phillips bit 2-50 mm. Centrotec Phillips bits with precision milled long shaft. Also compatible with standard or keyless chuck. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Phillips bit 3-50 mm. Centrotec Phillips bits with precision milled long shaft. Also compatible with standard or keyless chuck. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Pozidrive bit 1-100 mm. Centrotec Pozidrive bits with precision milled long shaft. Also compatible with standard or keyless chucks. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Pozidrive bit 2-100 mm. Centrotec Pozidrive bits with precision milled long shaft. Also compatible with standard or keyless chucks. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Pozidrive bit 3-100 mm. Centrotec Pozidrive bits with precision milled long shaft. Also compatible with standard or keyless chucks. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Pozidrive bit 1-50 mm. Centrotec Pozidrive bits with precision milled long shaft. Also compatible with standard or keyless chucks. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Pozidrive bit 2-50 mm. Centrotec Pozidrive bits with precision milled long shaft. Also compatible with standard or keyless chucks. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...

for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)IncludesQty. in pack: 2.00 UnitsFunctionsCentrotec Pozidrive bit 3-50 mm. Centrotec Pozidrive bits with precision milled long shaft. Also compatible with standard or keyless chucks. Includes 2 bits.Save time changing between drill and screw bits with the quick-change Centrotec SystemReduce fatigue with the light weight Centrotec chuck and decrease drilling/driving clearance with the compact...