Festool

IncludesQty. in pack: 2.00 UnitsFunctions2-piece, Length 38" (970 mm), Diameter 50 mm.Plastic, 2 piecesFor D 50

for Systainer³ LFunctionsProtects the contentmade of foam

Granat Abrasives Our longest-lasting and best-performing abrasive - well suited for nearly all applications.Festool Grit Abrasives Granat D90 P220 GR/100 497370

for portable circular saws, routers with adapter, jigsaws with adapterFunctionsThe FS FS 2424/2-LR 32 Guide Rail (95 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800...

for HKC 55, HK 55, HK 85, TS 60 K, TSV 60 KIncludesScrew Clamp, 4-11/16"FunctionThe cross cutting guide rail has an adjustable stop and an integrated rubber spring, which automatically brings the saw back to the starting position.connectible cross-cutting guide rail system for angle cuts with repeat accuracySecure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide railflexibly adjustable mitre anglelocking positions make...

FunctionsReady. For Anything.Li-HighPower cell technology makes it powerful enough for every application. At just 1.2 lbs (600 g), it is 20% lighter and 50% more compact than a 5.2 Ah battery pack. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.Bluetooth® technology enables communication with your mobile dust extractor to start automatically when the cordless tool is switched onThe illuminated capacity display...

for BS-KV D15IncludesDepth StopPerfect joinery. Now with even more versatility. The new knock-down DOMINO basic structure connectors and furniture connectors.The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.The new...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 20.00 UnitsFunctionsextra-long jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steelLength of cutting blade 3" (75 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Provides a work surface when coupled with Adapter Plate (500 175) for stationary edge banding applications. Requires Festool MFT/3 Table, sold separarely. Allows the user to swivel the machine (0 – 47°) in the bench in combination with adapter plate AP-KA 65 and position the workpiece horizontally during edging - for convenient and safe guidance, even with larger objectsDimensions length x width 3/8" (1 102 mm) x 28-1/4" (718 mm) ...

Functions The Perfectionist. Splinter-free cuts like never before. Perfect from the very first cut. The TSV 60 K plunge-cut saw with scoring blade. Since 1980, Festool tracksaws have been known for their reliable quality and absolute precision. Our objective: The perfect cut. With the TSV 60 K plunge-cut saw with scoring blade, we have achieved exactly that. Splinter-free cuts on both sides now from the very first cut. Coupled with the built-in KickbackStop, which stops the blade in the blink...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsFaster re-charge for less down time. AIRSTREAM batteries with the new SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non-equipped versions so the charging process can begin sooner getting you back to work faster.With AIRSTREAM functionLithium-ion (Li-ion) replacement charger for all...

for RSC 18FunctionsCut insulating materials with ease.The extra-long insulating material saw blade made of HCS tool steel is suitable for cutting a wide variety of insulating materials and cardboard.Extra-long blade for cuts in thick bundles of insulating materialSerrated for cutting insulating materialsWide saw-blade back for straight cutsLong-lasting HCS tool steelKnife edge suitable for plunge-cuttingThe right saw blade can be found quickly with Festool's color-coding: The color green...

for ETS 2 125, ETS EC 125, LEX 125FunctionsThe secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently together. Festool sanding pads are designed as carefully as every other component for optimum performance and a long life. All of our pads are...

Suitable for abrasive V93For RO 90 DXFunctionsFor sanding in narrow places such as shutters and louvers. (1 piece)For sanding in narrow spaces like wooden shutters, slats and railingsWorks with Festool 93mm sanding abrasivesCompatible with Festool RO 90 DX sanderPlate incl. interchangeable sanding padSlat sanding pad V93For sanding in tight spaces ...

For TS 55, TSC 55, ATF 55Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal General Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right,...

For planer head HK 82 RGFunctionsThe Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter of seconds. Create exotic textures and add character to your work by simply replacing the standard planer head with one of three rustic heads. Produce fine or coarse wavy textures, or a scalloped effect to mimic a hand-hewn appearance. Spiral cutter engages the...

For PS 300, PSB 300, PS(C) 420, PSB(C) 420IncludesQty. in pack: 20.00 UnitsFunctionsSolid one-piece, transparent splinterguard for Festool jigsaws. With the first cut, the splinterguard is perfectly matched to the inserted blade, providing a zero-clearance insert for precision cutting. The splinterguard significantly improves the cut quality and eliminates time-consuming rework by reducing tear-out, even in delicate to cut materials like melamine. Use a new splinterguard with a new blade or...

Includes2x screw2x square nut Functions Optional paint gun hook for the Festool WCR 1000 Workcenter. Attaches to the workcenter's profile groove. Holder for paint gunFor assembly at the profile groove for the WCR 1000 WorkcenterWeight 1.10 lbs (0.5 kg)Dimensions (L x W x H) 6" (148 mm) x 3" (76 mm) x 2-3/8" (60 mm) For WCR 1000, UCR 1000 ...

FunctionsConvenient on board storage option.The attachable storage box provides a convenient place to stow extra items such as batteries, filter bags, or cleaning accessories (case available separately as an accessory). Designed to attach to the CTC MIDI Dust Extractor.for storing battery packs and cleaning accessoriescompatible with CT 15

Functions The new suction hose: Smooth and elastic – with smooth outer skin for significantly improved handling, a longer service life and increased suction power. The new Cleantec extraction sleeve ensures a secure fit on the tool. Robust, smooth outer skin prevents the suction hose from becoming caughtInternal, extremely elastic suction hose for maximum flexibilityThe CLEANTEC extraction sleeve securely connects the suction hose and power tool with bayonet fittingAntistaticTemperature-resista...

Functions Stores any abrasive in a dedicated space, clearly organised, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand. With insert for dia. 3-1/2" (90 mm) abrasives and V93 abrasives ...

Includes cover for label field Functions Systainer³ combines workshop and construction site. with a broader base area for even more spacewithout tool insert

For OF 1010FunctionsThe Trammel Unit for the Festool OF 1010 Router allows you to rout precise circles and decorative curves from 6-1/32 inches up to 29-7/8 inches in diameter. Anchored in the center with the included trammel point, and attaches simply and securely to the router using thumbscrews.Cut perfect circles and curvesDiameter of circle can range from 6-1/32 inches up to 29-7/8 inchesOffers the flexibility to start and end cuts anywhere in the materialWork precisely to avoid waste of...

For KSC 60FunctionsConvenient transport around job sitesfacilitates and supports KAPEX applications with greater mobilityconvenient transport on the construction site and installation through simple folding in of the sawUsageMain applicationsSupports the Kapex at an ergonomic work heightConveniently move around on the job site thanks to KAPEX underframeTransport weight incl. accessories 18.74 kgWeight 28.66 lbs (13 kg)Work height 35.430 in (900 mm) ...

for all 18-volt devices (except ETSC 125, RTSC 400, DTSC 400, CTC SYS) Functions Communicate via Bluetooth®. The new Bluetooth® battery packs communicate with the Bluetooth® module on the mobile dust extractor and ensure that even a cordless tool starts the mobile dust extractor automatically when switched on. This allows you to now benefit from Festool's entire dust-free system when working with Festool cordless products. In combination with the SCA 8 AIRSTREAM rapid charger, battery parks...

For the DOMINO DF 500IncludesDOMINO dowel range 4 x 20, 5 x 30, 6 x 40, 8 x 40, 8 x 50, 10 x 50 mmDOMINO router for sizes 4, 5, 6, 8 and 10Systainer SYS3 M 187FunctionsFestool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work. The flat, elongated design will not rotate, ensuring perfect alignment for both edge and face...

For the OF 1400, OF 2000, OF 2200FunctionsFaster and easier bit changes with one wrench.Works on the Festool OF2200 and OF2000 (24mm Wrench)Dramatically reduces bit slippingMaintain center line and higher precission cuts over the life of the colletFor router shaft dia. 1/2“dustproof clamping colletsopen-ended spanner width 24 mm

for MFK/OFK 700, OF 900, OF 1000, OF 1010, OF 1010 R, KFFunctionsClamping collet 1/4", SZ-D6,35-OF1010Faster and easier bit changes with one wrench.Works on the OF1010With locking nutFor cutter shank dia. 1/4"

for RG 130 ECI, RG 130FunctionsThe best results when processing hard substrates.The DIA Hard-D130-ST grinding disc for the RG 130 with a diamond segment height of 3/16" (5 mm) is suited to smaller surfaces on a hard substrate. Thanks to the use of high-quality materials and the segment height, the milling disc has a long service life.for grinding on concrete, removal of epoxy resin from solid surfaces or coatings/paints from concreteMin. inner diameter 1" (25 mm)Segment height 3/16" (5...

For DF 700Functions14mm cutter for the DOMINO XL DF 700 Joiner for use with 14mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 14mm tenonsRouting tools with threaded supports for the...

For the DOMINO DF 500FunctionsDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.8mm DOMINO Cutter for use with 8mm DOMINO tenons.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 8 mm tenonsrouting tool with threaded support for the DOMINO DF 500...

Includes main filtersmooth suction hose dia. 27/32 x 3.5 m AS/CTR Functions Compact but large. Light but powerful. Whether it's used on the construction site or in the workshop, thanks to its huge container capacity of 36 l, the CT 36 provides maximum volume with compact dimensions. Equipped with swiveling castor wheels and rear wheels for optimum mobility. It also has a locking brake that provides stability on any surface as well as during transport. The flat filter fully integrated in the...

Functions Finish cleaner helps to ensure brilliant results. 500 ml spray bottle. For removing polish residues and grease marksDoes not contain siliconeWater-basedVolume (500 ml)

FunctionsIdeal for cleaning floor areas.Thanks to the two castors and two brush strip inserts, ideally suited to cleaning floor areas.Easy attaching to the floor tubeSimple and easy guidance thanks to the two castorsRollers with a soft running surface protect the floor and leave behind no signs of abrasionMore effective cleaning thanks to brush elementsLightweight and space-savingplastic, with 2 castors and 2 brush insertsfor D 27/D 36 ...

for Systainer³ XXLFunctionsProtects the contentmade of foam

Granat Abrasives Our longest-lasting and best-performing abrasive - well suited for nearly all applications.Festool Grit Abrasives Granat D90 P240 GR/100 497371

for AP-KA 65, MFT GP-KA 65 MFT/3IncludesM4 screws for fasteningQty. in pack: 15.00 UnitsGuide Plates for KA 65 Table Insert (500 366). Provides low friction surface area for stationary edge banding application. (15 pieces).Replacement or extension guide plates for the stationary use of the edge bander with adapter plate AP-KA 65 in MFT (with perforated board KA 65, order no. 500366) or installed in a separate workbenchDimensions (L x W x H) 10" x 1-1/8" x 1/4"(255 mm x 31 mm x 6 mm) ...

Includes FS-KP/30 adhesive pad Functions Perfect for guiding the machine in any position. Invented and perfected by Festool: The guide rail with adhesive pads. Allows users to make straight and precise cuts when carrying out horizontal work on floors or work surfaces, as well as for applications on walls. Easy to secure on different surfaces using the adhesive pads. It is easy and practical to transport multiple guide rails since they can be inserted on top of the Systainers. The FS/2-KP guide...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionslong jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steel Length of cutting blade 4-1/8" (105 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 2-3/8" (60 mm) ...

For HKC 55, HK 55FunctionsThis parallel rail is compatible with the HK 55 and HKC 55.Can also be used as table extensionParallel guide, guided on both sidesadjustable for workpiece widths of 59 mm to 345 mm

For PS 300, PSB 300, PS2FunctionsAttach the Parallel Guide to your Festool PS 300 or PSB 300 to make cuts parallel to material edge, up to a maximum width of 7 7/8 inches (200 mm) from the edge. Steel parallel guide attaches quickly and without the need for tools to the base plate of the jigsaw with thumb screws.Attach the Parallel Guide to your Festool PS 300 or PSB 300 to make cuts parallel to material edgeMake parallel cuts up to a maximum width of 7 7/8 inches (200 mm) from the...

Functions The Perfectionist. Splinter-free cuts like never before. Perfect from the very first cut. The TSV 60 K plunge-cut saw with scoring blade. Since 1980, Festool tracksaws have been known for their reliable quality and absolute precision. Our objective: The perfect cut. With the TSV 60 K plunge-cut saw with scoring blade, we have achieved exactly that. Splinter-free cuts on both sides now from the very first cut. Coupled with the built-in KickbackStop, which stops the blade in the blink...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsQuickly ready for use thanks to the rapid charger for Li-ion battery packs (except for CXS/TXS)Always up to date: LED display shows the remaining battery life and charge statusSensible storage: Space-saving with a secure cord holderSimple wall mounting through elongated holes on the rearLithium-ion (Li-ion) replacement charger for all 10.8 - 18 V battery packsCharging...

for various reversible blade cuttersIncludes2x oval head screwT15 TX spanner4x reversible bladeFunctionsReversible cutter for 491084, HW-WP 12x12x1,5; Qty. 4

for RSC 18FunctionsExtremely durable carbide for abrasive materials.The extremely durable carbide saw blade provides long lasting cutting performance in fiber cement, gypsum fiber materials and other abrasive materials.High-temperature-resistant carbide saw blade for maximum wear resistance in abrasive materialsCross-set teeth for fast cuttingThe right saw blade can be found quickly with Festool's color-coding: The color green stands for cutting construction materialsThe universal shank makes...

for ETS 2 125, ETS EC 125, LEX 125FunctionsThe secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently together. Festool sanding pads are designed as carefully as every other component for optimum performance and a long life. All of our pads are...

for LSS-STF-RO90 V93/6IncludesQty. in pack: 2.00 UnitsFunctionsThe extended flat delta-shaped sanding head for the RO 90 can be used for reaching under toe-kicks, deep into hard to reach corners, or for slats and louvers.Replacement backing pad for slat sanding pad

for RTS 400, RS 400, RTSC 400FunctionsStandard soft replacement pad for consistent sanding results, especially on flat surfaces and narrow workpieces, with your RTS400 or RS 400 sander. The secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently...