Festool

for Systainer³ ToolBagIncludesQty. in pack: 2.00 UnitsFunctionsDurable hand tool storage insert.Hand tools and accessories can be clearly stored and carried in an organized manner with the many pocket compartments of the ToolBag. The robust inner pockets can be set up for different configurations allowing for custom layouts.Robust tool bags are made of high-quality and durable materialInserts can be set for custom layouts in the Systainer³ ToolBag via a hook-and-loop fastenerCustomizable...

For OF 1400FunctionsAccessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit.Allows for faster and easier corner routingEnables more precise corner routingAvoids risk of base opening catching on the cornerAdditional support and stability, especially with small diameter bitsHard-fibre base runner with 3/4" (20 mm) centre boreReduces the opening of the router to the cutter diameterMax. cutter...

Functions Cordless and compact dust extraction perfect for cordless tools. Enjoy the freedom and convenience of cordless dust extraction. The new CTC MIDI is our largest and most powerful cordless dust extractor yet – featuring a 36-volt turbine (18V x 2) with up to 109 CFM (3100 l/min) and 76” (19000 Pa) of static water lift. Easily integrated with other cordless tools with the dependable and proven automatic start via a Bluetooth® equipped battery or the supplied remote control. Fully...

Functions Our masterpiece. Decisively improved. Now with unique kickback stop. Often, even just a millisecond is crucial: The kickback is the most common cause of serious injuries when using a track saw. Our unique kickback stop therefore stops the saw blade of our cordless track saw in the blink of an eye, and so not only protects your workpiece but also helps to minimize the risk of injury to your hands. In addition, this now allows users to make powerful, precise cuts at up to twice the...

FunctionsUtilizing suction from a CT Dust Extractor, the CT Wings provide an additional support for mounting long items to a wall like molding, or holding a straight-edge or level in place for layout marks. With 16 adjustable "wings", CT Wings adjust and conform to molding and other stock quickly while providing a tacky grip surface to minimize movement. A bypass-valve allows for quick and easy release and reset without going back to the extractor.Acts as an extra hand to hold materials, a...

for OSC 18IncludesOSC-A AdapterFunctionsEnables plunge cuts with a defined depthcontains two inserts: A rotating depth stop for plunge cuts and a sliding shoe for long, straight cutsincludes an adapter for fitting accessories without toolsworking angle can be flexibly adjustedMax. plunge depth, sliding shoe 3/4" (20.00 mm)Weight 0.44 lbs (0.2 kg)Notch scale on depth adjuster 1/16" (1.50 mm)Max. plunge depth, depth stop 2-1/4" (56.00 mm) ...

FunctionsPolypropylene (PP) with air regulating slide to adjust suction power. To connect tubes to extraction hose for comfortable grip.AntistaticWith sliding air regulator for suction power adjustmentwith bayonet fitting for secure connection to the extractor hoseCurvedFor D 27/D 36

For OF 2200FunctionsWhen used with the Festool OF 2200 Router, the Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the edge in increments of 1/10mm for ultra-precise routing. The Edge Guide is constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service...

For KSC 60FunctionsIntermediate bases for elevating the KS 60 to the height of a Systainer SYS 1 T-LOC and ClassicTable height = Systainer: Long workpieces can be comfortably supported on the floor while workingFor retrofitting the KS 60Items already included in the KS 60 SET

For OF 1010FunctionsIncludes Fine Adjustment for OF 1010 EQ Edge Guide.Allows for finer adjustments when using the Edge Guide router attachmentFor use with OF 1010 EQ RouterFor fast and dimensionally accurate adjustment on the parallel side fenceCan be retrofittedDelivered without side stop and guide rods

for Systainer³ MIncludesQty. in pack: 2.00 UnitsFunctionsdiced sections can be pushed out to produce any desired aperture

Functions Festool FS Guide rails are available in six different lengths from 32 inches to 118 inches (800 - 3000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking...

For WCR 1000; Standard hooks for mounting on the pegboard. Qty. in pack 6 units.

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 25.00 UnitsFunctionsthe jigsaw blade for a fine cut with conically sanded blades for a clean, splinter-free cutfor outstanding results in wooden materials thanks to high-grade HCS tool steelLength of cutting blade 3" (75 mm)Pitch 10 TPI (2.5 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Includes saw bladesplinterguardplug it-power cable (4 m)Systainer SYS3 M 137 Functions Designed to fit your hand with a low profile Most jigsaws have a hard time staying on course. Hard material and curves can easily cause the blade to deflect, resulting in time consuming re-cutting or sanding. Trion jigsaws are designed with adjustable carbide-tipped jaws that work with the blade clamping system and back-up bearing for triple blade guidance that keeps the blade perpendicular to the shoe at...

Includes MW 1000 cartSYS-AZ-MW 1000 pull-out drawerTSB/1-MW 1000 table Functions Turn any jobsite into your workshop. The MW 1000 is a customizable workshop that you can transport, set up, and breakdown in a flash on any jobsite. In just a few steps, the clever and compact unit becomes a stable workstation with space to access and use your tools wherever you are – just like in your own workshop. Combines worktops and storage while being customizable to your unique needsSave time by...

For MFK 700Includestarnishing padextraction hoodFunctionsReplacement for the slight inclination of the base, which helps prevent damage to the workpiece surface.Save time not having to file the edgeFine adjustment allows precise trimming of edge bandingAccuracy avoids waste of materialAllows for use of bearing-less bits in conjunction with feeler bearing set mounted to MFK 700 routerlow-dust routing thanks to extraction hood ...

for RSC 18IncludesQty. in pack: 5.00 UnitsFunctionsVersatile. Appropriate for wood and demolition work.The wear-resistant bi-metal universal blade is suitable for cutting wood with nails in it and is therefore ideal for demolition work.Ideal for cuts in solid wood with nailsThe high-temperature-resistant, wear-resistant bi-metal saw blade is ideal for general demolition workFlexible saw blade for flush cutsCross-set teeth for fast cuttingThe right saw blade can be found quickly with Festool's...

for TS 55 F, TSC 55 K, HK 55, HKC 55Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These beveled teeth alternate with the flat teeth when cutting into the material for smoother and more efficient cutting. This thin-kerfed blade design meets less resistance, for more...

Functions An ultra-light weight, flexible hose for use with the PLANEX Drywall Sander and other tools that accept a 36mm (1-1/2") hose, with the exception of the HL 850 planer. Has a flange used to lock the hose to the PLANEX for a secure fit that won't come lose during sanding. AntistaticTemperature-resistant to 158 °F (+70°C)Extremely flexibleKink-resistant suction hosewith bypass sleeve for extremely light fillers: enables the suction effect of the PLANEX on the wall to be reduced to an...

Functions Improve the way you work while making it more convenient to get the job done. Safely secure your workpiece for improved results with the most portable work-surface that provides multiple clamping points. The new SYS-MFT brings worktable functionality to a highly portable surface. The SYS-MFT also provides storage for all your key tools like clamps and hand tools. Equipped with 13 clamping points, an integrated V-groove for securing round stock like dowels and pipes, a non-skid strip...

Includes cover for label field Functions Systainer³ combines workshop and construction site. without tool insertproven systainer storage system

Functions Making exact and repeated cuts quickly and accurately anywhere without taking materials to a miter saw or sacrificing accuracy with a standard circular saw, makes this the ultimate solution for all wood processing on the jobsite. Coupled with FSK Guide Rails with integrated angle stops, HK saws bring a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any circular saw before. Also compatible with all existing FS Guide Rails. ...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Replacement Sanding Pad for the RTS 400 REQ

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

4 mm Cutter for the DF 500 Q Domino Joiner

5 mm Cutter for the DF 500 Q Domino Joiner

5" (125 mm)For medium/fine sanding and finishing sanding. The extra softness allows the abrasive to float for smoother results. (1-piece)

For KSC 60FunctionsAdapter base and saw blade holder for attaching the KS 60 to the UG-KAPEX KS 60 base frame

For OF 1400FunctionsOversized, heavy-duty base plate with integrated dust hood.Expand functionality of OF 1400 router since larger hole diameter of table widener allows use of larger bitsGreater base support avoids waste of materialAllows precise edge routing without wobbleIntegrated rotating chip catcher improves dust extractionFor sideway extractionRunning pad with support extensionrunning pad with chip deflectorvery good sliding propertiesthe integrated magnets hold the dust collector...

For OF 1010FunctionsFor sideway extractioncan be rotated by 360°Max. aperture 1-1/2" (37 mm)

for MFK/OFK 700, OF 900, OF 1000, OF 1010, OF 1010 R, KFFunctionsClamping collet 1/4", SZ-D6,35-OF1010Faster and easier bit changes with one wrench.Works on the OF1010With locking nutFor cutter shank dia. 1/4"

For SYS-Storage Box SYS-SBIncludesQty. in pack: 6.00 UnitsFunctionsPlastic containers used to store consumable and small parts.Compatible with the SYS-Combi 2, SYS-Combi 3 and SORTAINER SYS 4Plastic containers and compartment dividers for individual drawer partitionsfor tidy storageDimensions (L x W x H)2-3/8" (60 mm) x 2-3/8" (60 mm) x 2-3/4" (71 mm) ...

Functions Cordless and compact dust extraction perfect for cordless tools. Enjoy the freedom and convenience of cordless dust extraction. The new CTC MIDI is our largest and most powerful cordless dust extractor yet – featuring a 36-volt turbine (18V x 2) with up to 109 CFM (3100 l/min) and 76” (19000 Pa) of static water lift. Easily integrated with other cordless tools with the dependable and proven automatic start via a Bluetooth® equipped battery or the supplied remote control. Fully...

for OSC 18IncludesOSC-A AdapterFunctionsmakes it possible to saw with minimal dust generationProvides an optimal view of the workpiecemachine can be safely guided with both handsincludes an adapter for fitting accessories without toolsWeight 0.28 lbs (0.125 kg)Max. dust extraction device plunge depth 1-7/8" (47.00 mm) ...

IncludesQty. in pack: 3.00 UnitsFunctions3 piece, 37 1/2" (950 mm) D 36.Of stainless steel, 3-pieceFor D 27/D 36

for Systainer³ LIncludesQty. in pack: 2.00 UnitsFunctionsdiced sections can be pushed out to produce any desired aperture

Functions Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking...

for HKC 55, HK 55, HK 85, TS 60 K, TSV 60 K Includes Screw Clamp, 4-11/16" Function The cross cutting guide rail has an adjustable stop and an integrated rubber spring, which automatically brings the saw back to the starting position.connectible cross-cutting guide rail system for angle cuts with repeat accuracySecure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide railflexibly adjustable mitre anglelocking positions...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe jigsaw blade for a fine cut with reverse toothing and conically sanded blades for a clean, splinter-free cutfor outstanding results in wooden materials thanks to high-grade HCS tool steelLength of cutting blade 3" (75 mm)Pitch 10 TPI (2.5 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Includes saw bladesplinterguardplug it-power cable (4 m)Systainer SYS3 M 137 Functions Easy, one-handed control with D-handle grip The secret to splinter-free cuts is full material support at the cutting point. Trion jigsaw splinter guards are designed to be cut by the blade for perfect zero-clearance between the blade and the splinterguard. The resultant cut is clean through the entire piece with little or no finishing required. The D-handle PSB 300 features a finger tip trigger and smaller...

Includes2x keys incl. bits Functions Fastener to attach double hooks to profile. (2 pieces) The keys enable the attachment of individual accessories to the profiled groove For WCR 1000, UCR 1000

Includes fitted wooden coveringsfour extension supports with wooden coverings Functions Mobile Saw Table and Work Bench Ideal for cutting sheet goods and/or using as an assembly bench on construction sites, production shop, or the home workshop: designed to be operated by one person, saving both time and money during your fabrication and assembly process. Ideal for use on the go thanks to compact dimensions (when collapsed for transport), low weight, and robust chassisIntuitive design promotes...

The new benchmark in circular saws. Festool track saws have been setting the standard for saws for decades. The TS 60 K is redefining this yet again. In the blink of an eye, the unique Kickback Stop protects your workpiece and helps to minimize the risk of injury. Designed to work with the entire Festool saw system and with a cutting depth up to 2-7/16" (62 mm). The most versatile saw of its kind guarantees you premium work results whether ripping, cross-cutting, beveled and angle cuts as well...

For OF 2200IncludesQty. in pack: 2.00 UnitsFunctionsUse Guide Rods to attach Parallel Edge Guide or Guide Stop to the OF 2200 Router. Set of 2.Guided cuts are perfectly straightUtilize same rods for guide stop and edge guideWork precisely to avoid waste of material and reworkMade in GermanyGuide rods for side and guide stops 2 pieces ...