Sawing

For TS 75Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Standard Ripping blade for the TS 75 Plunge Cut Saw is an excellent general purpose, clean-cutting blade for wood and soft plastics, and enables precision cutting for glue-ready joints. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more...

For KSC 60Includesadjustable stoptelescopic slide-out scalefold-out pedestal and carry casemetric measurement scaleFunctionsFor use in conjunction with the UG-KAPEX KS 60 adapter baseConsisting of KA-UG-L and KA-UG-RUsageMain applicationsFacilitates and supports KAPEX applicationsSupports long materialPrecise sawing of moldings and boardsLength of extension arm (without telescope) 58.26 in (1 480.00 mm)Max. meas. length 94.48 in (2 400.00 mm) ...

for portable circular saws, routers with adapter, jigsaws with adapter, DSC-AG 125, DSC-AG 230FunctionsThe FS FS 1400/2-LR 32 Guide Rail (55 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32...

for HKC 55, HK 55, HK 85, TS 60 K, TSV 60 KIncludesScrew Clamp, 4-11/16"FunctionThe cross cutting guide rail has an adjustable stop and an integrated rubber spring, which automatically brings the saw back to the starting position.connectible cross-cutting guide rail system for angle cuts with repeat accuracySecure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide railflexibly adjustable mitre anglelocking positions make...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsextra-long jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steelLength of cutting blade 3" (75 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Functions The new benchmark in circular saws. Festool track saws have been setting the standard for saws for decades. The TS 60 K is redefining this yet again. In the blink of an eye, the unique Kickback Stop protects your workpiece and helps to minimize the risk of injury. Designed to work with the entire Festool saw system and with a cutting depth up to 2-7/16" (62 mm). The most versatile saw of its kind guarantees you premium work results whether ripping, cross-cutting, beveled and angle...

for RSC 18IncludesQty. in pack: 5.00 UnitsFunctionsOur strongest saw blade for metal.The wear-resistant bi-metal saw blade is suitable for cutting metal profiles.Long service life and faster work progress when sawing metal1/16" (1.6 mm) pitch, ideal for cutting steel and iron profiles with a wall thickness of up to 5/16" (8 mm)Long lasting thanks to the high-temperature-resistant and wear-resistant bi-metal saw bladeFlexible saw blade for flush cutsCross-set teeth for fast cuttingThe right saw...

for TS 55 F, TSC 55 K, HK 55, HKC 55Quality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.The all-rounder for all types of wood materialSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsCutting angle and tooth shape are adapted to the...

For PS 300, PSB 300, PS(C) 420, PSB(C) 420IncludesQty. in pack: 5.00 UnitsFunctionsSolid one-piece, transparent splinterguard for Festool jigsaws. With the first cut, the splinterguard is perfectly matched to the inserted blade, providing a zero-clearance insert for precision cutting. The splinterguard significantly improves the cut quality and eliminates time-consuming rework by reducing tear-out, even in delicate to cut materials like melamine. Use a new splinterguard with a new blade or...

for portable circular saws, routers with adapter, jigsaws with adapterFunctionsThe FS FS 2424/2-LR 32 Guide Rail (95 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800...

for HKC 55, HK 55, HK 85, TS 60 K, TSV 60 KIncludesScrew Clamp, 4-11/16"FunctionThe cross cutting guide rail has an adjustable stop and an integrated rubber spring, which automatically brings the saw back to the starting position.connectible cross-cutting guide rail system for angle cuts with repeat accuracySecure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide railflexibly adjustable mitre anglelocking positions make...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 20.00 UnitsFunctionsextra-long jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steelLength of cutting blade 3" (75 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Functions The Perfectionist. Splinter-free cuts like never before. Perfect from the very first cut. The TSV 60 K plunge-cut saw with scoring blade. Since 1980, Festool tracksaws have been known for their reliable quality and absolute precision. Our objective: The perfect cut. With the TSV 60 K plunge-cut saw with scoring blade, we have achieved exactly that. Splinter-free cuts on both sides now from the very first cut. Coupled with the built-in KickbackStop, which stops the blade in the blink...

for RSC 18FunctionsCut insulating materials with ease.The extra-long insulating material saw blade made of HCS tool steel is suitable for cutting a wide variety of insulating materials and cardboard.Extra-long blade for cuts in thick bundles of insulating materialSerrated for cutting insulating materialsWide saw-blade back for straight cutsLong-lasting HCS tool steelKnife edge suitable for plunge-cuttingThe right saw blade can be found quickly with Festool's color-coding: The color green...

For TS 55, TSC 55, ATF 55Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal General Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right,...

For PS 300, PSB 300, PS(C) 420, PSB(C) 420IncludesQty. in pack: 20.00 UnitsFunctionsSolid one-piece, transparent splinterguard for Festool jigsaws. With the first cut, the splinterguard is perfectly matched to the inserted blade, providing a zero-clearance insert for precision cutting. The splinterguard significantly improves the cut quality and eliminates time-consuming rework by reducing tear-out, even in delicate to cut materials like melamine. Use a new splinterguard with a new blade or...

For KSC 60FunctionsConvenient transport around job sitesfacilitates and supports KAPEX applications with greater mobilityconvenient transport on the construction site and installation through simple folding in of the sawUsageMain applicationsSupports the Kapex at an ergonomic work heightConveniently move around on the job site thanks to KAPEX underframeTransport weight incl. accessories 18.74 kgWeight 28.66 lbs (13 kg)Work height 35.430 in (900 mm) ...

Includes FS-KP/30 adhesive pad Functions Perfect for guiding the machine in any position. Invented and perfected by Festool: The guide rail with adhesive pads. Allows users to make straight and precise cuts when carrying out horizontal work on floors or work surfaces, as well as for applications on walls. Easy to secure on different surfaces using the adhesive pads. It is easy and practical to transport multiple guide rails since they can be inserted on top of the Systainers. The FS/2-KP guide...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionslong jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steel Length of cutting blade 4-1/8" (105 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 2-3/8" (60 mm) ...

For HKC 55, HK 55FunctionsThis parallel rail is compatible with the HK 55 and HKC 55.Can also be used as table extensionParallel guide, guided on both sidesadjustable for workpiece widths of 59 mm to 345 mm

For PS 300, PSB 300, PS2FunctionsAttach the Parallel Guide to your Festool PS 300 or PSB 300 to make cuts parallel to material edge, up to a maximum width of 7 7/8 inches (200 mm) from the edge. Steel parallel guide attaches quickly and without the need for tools to the base plate of the jigsaw with thumb screws.Attach the Parallel Guide to your Festool PS 300 or PSB 300 to make cuts parallel to material edgeMake parallel cuts up to a maximum width of 7 7/8 inches (200 mm) from the...

Functions The Perfectionist. Splinter-free cuts like never before. Perfect from the very first cut. The TSV 60 K plunge-cut saw with scoring blade. Since 1980, Festool tracksaws have been known for their reliable quality and absolute precision. Our objective: The perfect cut. With the TSV 60 K plunge-cut saw with scoring blade, we have achieved exactly that. Splinter-free cuts on both sides now from the very first cut. Coupled with the built-in KickbackStop, which stops the blade in the blink...

for RSC 18FunctionsExtremely durable carbide for abrasive materials.The extremely durable carbide saw blade provides long lasting cutting performance in fiber cement, gypsum fiber materials and other abrasive materials.High-temperature-resistant carbide saw blade for maximum wear resistance in abrasive materialsCross-set teeth for fast cuttingThe right saw blade can be found quickly with Festool's color-coding: The color green stands for cutting construction materialsThe universal shank makes...

for TS 60 K, TSV 60 K, CSC SYS 50Quality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.Circular saw blade with alternate-top-bevel teeth for fast and smooth sawingSaw teeth made of high-quality carbide – for robust endurance and good cut qualityWith alternating teeth...

For KSC 60IncludesunderframeKA-UG-KS R/L trimming attachmentFunctionsConvenient working platform and transport around the shop or on the job siteSelf-contained folding design for transportconsisting of KA-UG-L and KA-UG-R trimming attachments and KS 60 UG-KAPEX underframeUsageMain applicationsSupports the Kapex at an ergonomic work heightConveniently move around on the job site thanks to KAPEX underframeWeight 46.30 lbs (21 kg)Work height 35.430 in (900 mm) ...

For PS 300, PSB 300, PS2FunctionsAttach the accessory Circle Cutter to your Festool jigsaw for precise circles ranging in diameter from 4 23/32 inches to 28 11/32 inches (120 - 720 mm). Steel circle cutter attaches to base plate of jigsaw with thumb screws and comes with a centering mandrel. For use with both the Festool PS 300 and PSB Jigsaws.Cut precise circles ranging in diameter from 4 23/32 inches to 28 11/32 inches (120 - 720 mm)For use with both the Festool PS 300 and PSB...

for TSC 55, TSC 55 K, HKC 55 Functions Keep the workspace clean by virtually collecting all dust with the SB-TSC Dust Bag. When not in use, the bag folds down for space-saving transportation and storage. Includes dust cap to prevent potential spillage. For use with the TSC 55 and the HKC 55 Track Saws. Folds down for space-saving transportationFor all woodsWith dust capwith practical zip fastener for quick emptying ...

Includes FS-KP/30 adhesive pad Functions Perfect for guiding the machine in any position. Invented and perfected by Festool: The guide rail with adhesive pads. Allows users to make straight and precise cuts when carrying out horizontal work on floors or work surfaces, as well as for applications on walls. Easy to secure on different surfaces using the adhesive pads. It is easy and practical to transport multiple guide rails since they can be inserted on top of the Systainers. The FS/2-KP guide...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsextra-long jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steelLength of cutting blade 5-3/4" (145 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 3-15/16" (100 mm) ...

Functions Power and precision in the palm of your hand Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications....

for RSC 18Includes2x WOOD UNIVERSAL HSR 230/4.3 BI reciprocating saw bladeWOOD UNIVERSAL HSR 305/4.3 BI reciprocating saw bladeWOOD BASIC SR 305/5 reciprocating saw bladeMETAL STEEL HSR 230/1.6 BI reciprocating saw bladeQty. in pack: 5.00 UnitsFunctionsAll you need for cutting wood and metal.This set consists of 5 saw blades for fast cutting of wood and metal.Consisting of saw blades of the three categories WOOD BASIC, WOOD UNIVERSAL and METALThe right saw blade can be found quickly with...

For TS 75Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal general purpose blade for the TS 75 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more...

for FS/2-KPIncludesQty. in pack: 30.00 UnitsFunctionsSecure the insecurable.Invented and perfected by Festool: The guide rail with adhesive pads. For straight and precise cuts when carrying out horizontal work on floors or work surfaces, as well as for applications on walls. The adhesive pads make it easy for users to secure the guide rail on different surfaces where conventional clamps will not work.The adhesive pads can be quickly and easily inserted in the cut-outs on the FS/2-KPRemove...

For FSK 250, FSK 420Easily and safely transport FSK Guide Rails. Comes equipped with shoulder straps for comfortable and convenient transportation. This tote bag offers secure protection for the new FSK Guide Rails. This tote bag is available for the FSK 420 and FSK 670 Guide Rails.Carry bag with shoulder straps

For KS 120Includescrown molding stop with table widenerFunctionsExpanding the versatility of the KAPEX sliding compound miter saw, the Crown Stop with Base Extension supports nested workpieces at any angle, and provides enhanced material support to the left or right of the saw. Integrated t-slots enable additional clamping capability, expanding the use of job-specific jigs when used with Festool FS clamps. Includes 1 base extension and 1 crown stop.Secures crown molding in the nested postion...

for RSC 18FunctionsConvenient and effective dust extraction.The RSC- AV dust extraction adapter enables nearly dust-free work with the reciprocating saw and is particularly suitable for working indoors. Tool-free mounting of the dust extraction adapter on the retractable shoe makes for quick and easy attachment.Efficient: thanks to fast, tool-free installation of the dust extraction adapterClear view: when attaching the dust extraction adapter to the saw, the cutting area is kept clearly...

For PS 300, PSB 300, PS 2FunctionsAttach your Festool jigsaw to any length Festool guide rail for straight, repeatable cuts. The PS300 and PSB300 jigsaws simply clip into this base for smooth and straight cutting with any Festool guide rail.Connect your Festool PS 300 or PSB 300 to the any Festool guide rail for smooth, straight cuttingToolless attachment to jigsaws and to rail eliminate setup timeAllows use of jigsaws with FS and FS/2 guide systems ...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe universal jigsaw blade for right-angled cutting covers all relevant wood applicationsideal also in combination with the Festool guide railfor outstanding results in wooden materials thanks to high-grade HCS tool steelwith limited teeth, for a quick cut at the right angleLength of cutting blade 3" (75 mm)Pitch 6-7 TPI (4 mm)Max. workpiece thickness 1-3/16" (30...

Functions Power and precision in the palm of your hand Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications....

for TS 55 F, TSC 55 K, HK 55, HKC 55Quality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.The fine-cut saw blade for clean and splinter-free cutsSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsCutting angle and tooth shape are adapted to...

For PS 420IncludesJigsaw Splinterguard, 5-PackStickFix baseplateDimpled base insertHard fiber base insertSteel base insertangle baseGuide Rail Base for CARVEX Jigsawcircle cutterStickFix feltSystainer SYS3 M 112FunctionsWith a wide range of time-saving, quality improving, task-specific bases, you’ll do more with a jigsaw than you ever thought possible. Keep the full system of bases on hand and ready for use with the CARVEX Accessory Set. The best value for purchasing all of the accessories...

for KS 60, KSC 60, KS 120FunctionsBevel for transferring angles to the circular cross-cut sawFor interior and exterior anglesDissecting angle is generated automatically

For FSK 670Easily and safely transport FSK Guide Rails. Comes equipped with shoulder straps for comfortable and convenient transportation. This tote bag offers secure protection for the new FSK Guide Rails. This tote bag is available for the FSK 420 and FSK 670 Guide Rails.Carry bag with shoulder straps

For FS/2for FS/2-KPIncludesClamping jawsfixed jaws Functions Designed for rapid positioning and clamping of Festool FS Guide Rails - includes fixed jaw and clamping jaw. The FS-Rapid Clamp is particularly useful for fast and reliable clamping of guide rails to sheet good materials. Mounts to guide rails using the continuous bottom t-slot for limitless adjustability. One-handed trigger action enables quick set up on material edge. Fits all Festool guide rails. Includes 1 clamp. Designed for...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 20.00 UnitsFunctionsthe universal jigsaw blade for right-angled cutting covers all relevant wood applicationsideal also in combination with the Festool guide railfor outstanding results in wooden materials thanks to high-grade HCS tool steelwith limited teeth, for a quick cut at the right angleLength of cutting blade 3" (75 mm)Pitch 6-7 TPI (4 mm)Max. workpiece thickness 1-3/16" (30...

Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 55 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut...

for TS 55 R, TS 55 F, TSC 55, TSC 55 K Includes Qty. in pack: 5.00 Units Functions Achieve splinter free cuts on both sides of the blade by using the off-cut side splinter guard in conjunction with the integrated guide rail splinter guard. For best results, replace splinter guard when switching between different kerf blades. Splinter guards attach easily to the TS 55 REQ. Includes 5 splinter guards. This product is not compatible with the TS 55 EQ or TS 75 EQ, see product #491473. Save...

for all 18-volt devices (except ETSC 125, RTSC 400, DTSC 400, CTC SYS) Functions Communicate via Bluetooth®. The new Bluetooth® battery packs communicate with the Bluetooth® module on the mobile dust extractor and ensure that even a cordless tool starts the mobile dust extractor automatically when switched on. This allows you to now benefit from Festool's entire dust-free system when working with Festool cordless products. In combination with the SCA 8 AIRSTREAM rapid charger, battery parks...