Sawing

For KS 120FunctionsReplacement clamp for securing material to the deck of the KAPEX miter saw. Fast-action cam design enables quick and secure material clamping for safer cutting. A non-marring plastic foot protects the material during cutting operations, and is octagonally shaped, providing secure clamping adjacent to the fence. Can be used for securing material left or right of blade. Includes one clamp.Fast-action cam design enables quick and secure material clamping for safer...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe long jigsaw blade for right-angled cutting covers all relevant wood applicationsideal also in combination with the Festool guide railfor outstanding results in wooden materials thanks to high-grade HCS tool steelwith limited teeth, for a quick cut at the right angleLength of cutting blade 4-1/8" (105 mm)Pitch 6-7 TPI (4 mm)Max. workpiece thickness 2-3/8" (60...

for FS/2, FS/2-KP, FSK, MFT Functions The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for...

for TS 60 K, TSV 60 K, CSC SYS 50Quality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.A blended geometry blade featuring a combination of alternate-top-bevel (ATB) as well as a raker with triple-chip (TCG) design for combination of smooth cuts and durabilityExcellent...

For PS(C) 420, PSB(C) 420FunctionsThe hard fiber base insert is for use on wood and similar materials. It provides a smooth, low friction, phenolic surface and, unlike a plastic base, will not pick up chips or filings that may scratch or damage your material.Attaches tool-free to jigsawMade of phenolic resin for low-frictionWill not pick up chips that may scratch the cutting surfaceWorks with all Festool CARVEX Jigsawsrobust laminated fabric base for wood or similar materials ...

for KS 120, KS 88, KS 60, KSC 60FunctionsUse the Clamping Kit to secure the KAPEX sliding compound miter saw to the Festool Multifunction Table. Hex bolts drop into the KAPEX deck base as captured nuts, and are easily secured beneath the MFT with the oversized knobs. Pack of 2 clamping knobs with bolts.Enables easy and secure clamping of your KAPEX miter saw to any Festool MFT tableBolts are easily secured beneath the MFT with the oversized knobsFast, easy, and secure.Pack of 2 clamping knobs...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 20.00 UnitsFunctionsthe long jigsaw blade for right-angled cutting covers all relevant wood applicationsideal also in combination with the Festool guide railfor outstanding results in wooden materials thanks to high-grade HCS tool steelwith limited teeth, for a quick cut at the right angleLength of cutting blade 4-1/8" (105 mm)Pitch 6-7 TPI (4 mm)Max. workpiece thickness 2-3/8" (60...

for TS 55, TS 55 R, TS 55 F, TSC 55, TSC 55 KFunctionsParallel Edge Guide enables guided, parallel cutting with the TS 55 Plunge Cut Saw. Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails. Attaches to both sides of the saw for short side or broad side cuts. Rip capacity from the blade side up to 11 13/16in (300mm), and on the motor side up to 3 3/4in (95mm).Can be used on both sides of the saw for short side and broad side cutsEnables parallel cutting when...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsQuickly ready for use thanks to the rapid charger for Li-ion battery packs (except for CXS/TXS)Always up to date: LED display shows the remaining battery life and charge statusSensible storage: Space-saving with a secure cord holderSimple wall mounting through elongated holes on the rearLithium-ion (Li-ion) replacement charger for all 10.8 - 18 V battery packsCharging...

For TS 75Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and...

for FS/2, FS/2-KP, FSK, MFTIncludesQty. in pack: 2.00 UnitsFunctionsDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.Clamping thickness 4 11/16 inches (120...

For PS(C) 420, PSB(C) 420FunctionsThe metal cutting base insert has a steel surface, which is far more durable that the standard base. For use when cutting metals with the CARVEX jigsaw, which is capable of cutting non-ferrous metals up to 3/4" and steel up to 3/8" thick. Please note that you need to use a metal cutting blade for this application. Also, when using dust extraction during metal cutting, you need to make use of Festool's optional spark trap to prevent hazardous conditions which...

for TS 55, TS 55 R, TS 55 F, TS 60 K, TSC 55, TSC 55 KFunctionsThe cover for efficient dust extraction.The cover serves two purposes. It creates a tight seal on the housing side of the circular saw for more effective dust extraction and can also be used as a false joint guide plate.Low friction thanks to hard-fiber lateral gliding surfaceCan also be used in combination with the guide railCan also be used as false joint setCover for improved dust extractionUsageMain applicationsCutting false...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe extra-long jigsaw blade for right-angled cutting covers all relevant wood applicationsideal also in combination with the Festool guide railfor outstanding results in wooden materials thanks to high-grade HCS tool steelwith limited teeth, for a quick cut at the right angleLength of cutting blade 5-3/4" (145 mm)Pitch 6-7 TPI (4 mm)Max. workpiece...

for FS/2, FS/2-KP, FSK, MFT Functions The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsCharges two batteries at the same time: One charger for two battery packs.The TCL 6 DUO Rapid Charger supplies enough power to charge two battery packs at the same time. This is beneficial for all tools with a 2 x 18 V dual battery system. Being able to charge two battery packs at the same time is not only convenient, but reduces downtime as both batteries are ready at the...

for TS 55 F, TSC 55 K, HK 55, HKC 55FunctionsQuality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.The systematic solution for work with laminate and boards bonded with melamine resinSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsCutting...

for FS/2, FS/2-KP, FSK, MFTIncludesQty. in pack: 2.00 UnitsFunctionsDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.Clamping thickness 11 13/16 inches...

For PS(C) 420, PSB(C) 420FunctionsThe felt base insert employs replaceable felts which attach via StickFix hook and loop. The felts provide maximum assurance against abrasion on delicate surfaces and finishes. Replacement felts can be purchased separately in 5-packs (497 444).Attaches tool-free to jigsawProtect delicate surfaces from potential scratches or marringUses hook and loop design with replaceable felt padsCompatible with all Festool CARVEX Jigsaw models.with StickFix hook-and-loop...

for TSC 55, TSC 55 K, HKC 55 Functions Keep the workspace clean by virtually collecting all dust with the SB-TSC Dust Bag. When not in use, the bag folds down for space-saving transportation and storage. Includes dust cap to prevent potential spillage. For use with the TSC 55 and the HKC 55 Track Saws. Folds down for space-saving transportationFor all woodsWith dust capwith practical zip fastener for quick emptying ...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe jigsaw blade for curved cuts with conically sanded blades for a clean cutLength of cutting blade 3" (75 mm)Pitch 18 TPI (1.4 mm)Max. workpiece thickness 1-3/16" (10 mm)

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsFaster re-charge for less down time. AIRSTREAM batteries with the new SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non-equipped versions so the charging process can begin sooner getting you back to work faster.With AIRSTREAM functionLithium-ion (Li-ion) replacement charger for all...

For TS 55, TSC 55, ATF 55FunctionsFestool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Solid Surface/Laminate blade for the TS 55 Plunge Cut Saw is a long-lasting , high cut quality blade for laminate flooring and solid surface countertop material. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These...

for FS/2, FS/2-KP, FSK, MFTIncludesQty. in pack: 2.00 UnitsFunctionsDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.Clamping thickness 4 11/16 inches (120...

Functions Gecko is equipped with dual quick-release suction cups that form a tight and secure seal with non-porous material. With an easy to grip handle, use the Gecko to lift and carry non-porous materials and sheet goods up to 110 pounds. Combine the Gecko Suction Handle with the Gecko Guide Rail Adapter to secure your Festool guide rail to any non-porous flat surface for secure and precise cutting or routing. Includes one Gecko Suction Handle Lift and carry non-porous materials and sheet...

Functions Standard, universal base insert for wood and wood-like materials. Comes standard with CARVEX Jigsaws. Replacement. Attaches tool-free to jigsawFor use with wood and wood-like materialsReplacement for base insert included with Festool CARVEX JigsawsWorks with all Festool CARVEX JigsawsPlastic all-purpose base for wood or similar materials

for all 18-volt devices (except ETSC 125, RTSC 400, DTSC 400, CTC SYS) Functions Communicate via Bluetooth®. The new Bluetooth® battery packs communicate with the Bluetooth® module on the mobile dust extractor and ensure that even a cordless tool starts the mobile dust extractor automatically when switched on. This allows you to now benefit from Festool's entire dust-free system when working with Festool cordless products. In combination with the SCA 8 AIRSTREAM rapid charger, battery parks...

for all applications and most 18-volt devices – with a focus on power and endurance (not compatible with the sanders ETSC 125, RTSC 400, DTSC 400 and the dust extractor CTC SYS)Includes2x BP 18 Li 5.0 ASI battery packTCL 6 DUO rapid chargerSystainer SYS3 M 187FunctionsStored, protected, organized, and charged in a flash: Two 5.0 Ah battery packs. One DUO Rapid Charger. In the Systainer³.The Festool Energy set is the ideal addition to the Festool Basic (no batteries included) cordless tools and...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe jigsaw blade for curved cuts with conically sanded blades for a clean cutLength of cutting blade 3" (75 mm)Pitch 6-7 TPI (4 mm)Max. workpiece thickness 1-3/16" (30 mm)

for TS 60 K, TSV 60 K, CSC SYS 50FunctionsQuality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.Trapezoidal/flat tooth circular saw blade for processing plastic materialsIdeal in combination with the Festool TS 60 K plunge-cut saw – for exact, efficient...

for FS/2, FS/2-KP, FSK, MFTIncludesQty. in pack: 2.00 UnitsFunctionsDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.Clamping thickness 11 13/16 inches...

for KS 120, KS 88, KS 60, KSC 60IncludesQty. in pack: 2.00 UnitsFunctionsImproved for 2019, expanding the versatility of the Kapex sliding compound miter saw and UG extensions, the Crown Stop supports nested workpieces at any angle and provides enhanced material support to the left or right of the saw. Only compatible with KA-UG extensions, sold separately. Includes two (2) crown stops.Stop for positioning crown moldings at an angleonly compatible with KA-UG trimming attachment underframe ...

for all applications and most 18-volt devices – when the focus is on compact designIncludes2x BP 18 Li 4,0 HPC-ASI battery packTCL 6 DUO rapid chargerSystainer SYS3 M 187FunctionsStored, protected, organized, and charged in a flash: Two 4.0 Ah Li-HighPower Compact battery packs. One DUO Rapid Charger. In the Systainer³.The Festool Energy set is the ideal addition to the Festool Basic (no batteries included) cordless tools and also offers additional battery packs for the workshop and the job...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 20.00 UnitsFunctionsthe jigsaw blade for curved cuts with conically sanded blades for a clean cutLength of cutting blade 3" (75 mm)Pitch 6-7 TPI (4 mm)Max. workpiece thickness 1-3/16" (30 mm)

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsQuickly ready for use thanks to the rapid charger for Li-ion battery packs (except for CXS/TXS)Always up to date: LED display shows the remaining battery life and charge statusSensible storage: Space-saving with a secure cord holderSimple wall mounting through elongated holes on the rearLithium-ion (Li-ion) replacement charger for all 10.8 - 18 V battery packsCharging...

For PS(C) 420, PSB(C) 420IncludesQty. in pack: 5.00 UnitsFunctionsThese felt pads are used with the StickFix Base for the Festool CARVEX jigsaws, which attach via hook and loop. The felts provide maximum assurance against abrasion on delicate surfaces and finishes. Includes five felt pads.Attach tool-free to StickFix CARVEX Jigsaw Base with a hook and loop designProtect delicate surfaces from potential scratches or marringWorks with all Festool CARVEX JigsawsSpare felt for StickFix baseplate...

For TS 75FunctionsFestool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Solid Surface/Laminate blade for the TS 75 Plunge Cut Saw is a long-lasting , high cut quality blade for laminate flooring and solid surface countertop material. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These beveled teeth...

For PS(C) 420, PSB(C) 420IncludesGuide Rail Base for CARVEX Jigsawcircle cutterFunctionsThe Circle Cutter Set consists of the optional Guide Rail Base Adapter and Circle Cutter for the CARVEX jigsaw.This base can be used to adapt your CARVEX jigsaw to a Festool guide rail to get extremely straight cuts. When used with the CARVEX, it can be attached to a guide rail to cut in either direction.The circle cutter for the CARVEX jigsaws can be used to cut a circles up to nearly ten feet in...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsspecially designed for excellent results in virtually all plasticsresistant to high temperatures and hard-wearingLength of cutting blade 3" (75 mm)Pitch 8-9 TPI (3 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

For FS/2for FS/2-KPIncludesstop ruler with additional clampadjustable stopQty. in pack: 2.00 Units Functions The Parallel Guides greatly enhances the capability of the Festool Guide Rail System by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guides are the two longer sections and offer consistent rip cuts using two adjustable stops that engage the edge of the material parallel to the cut line. They are adjustable up to 650mm ( 25 19/32 in). The Parallel...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsCharges two batteries at the same time: One charger for two battery packs.The TCL 6 DUO Rapid Charger supplies enough power to charge two battery packs at the same time. This is beneficial for all tools with a 2 x 18 V dual battery system. Being able to charge two battery packs at the same time is not only convenient, but reduces downtime as both batteries are ready at the...

for TS 55 F, TSC 55 K, HK 55, HKC 55FunctionsQuality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.The systematic solution for cuts in aluminum and plasticSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsCutting angle and tooth shape are...

For KS 120FunctionsContoured support board. Only for use with the crown stop AB-KA-UG/2. Offers full support of material across the saw while also allowing full visibility of the miter gauge.Length 34.65 in (880 mm)Width 8.46 in (215 mm)Height 0.75 in (19 mm)Weight 3.97 lbs (1.8 kg)

For PS(C) 420, PSB(C) 420FunctionsThis base can be used to adapt your CARVEX jigsaw to a Festool guide rail to get extremely straight cuts. When used with the CARVEX, it can be attached to a guide rail to cut in either direction. It is also used in conjunction with the optional circle cutter (497304) to cut arcs and circles.Also available as a set containing the Guide Rail Base Adapter and Circle Cutter (497 443)Attaches tool-free to jigsawAdapts the jigsaw to Festool's guide rails for...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsfor easy processing of soft plastics and plastic profilesLength of cutting blade 3" (75 mm)Pitch 17 TPI (1.5 mm)Max. workpiece thickness 1-3/16" (30 mm)

Includes table with perforated top and foldaway legs Functions Though this basic, shorter version of the MFT/3 is engineered especially for use with the Kapex miter saw, it delivers the full versatility and features of the Festool multifunction table system. On the jobsite or in the workshop, use the MFT/3-Kapex as a supplemental work surface for sanding, jointing, clamping, or just about anything else. The perforated top is ideally suited for use with MFT clamping accessories, and the...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsFaster re-charge for less down time. AIRSTREAM batteries with the new SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non-equipped versions so the charging process can begin sooner getting you back to work faster.With AIRSTREAM functionLithium-ion (Li-ion) replacement charger for all...

for TS 60 K, TSV 60 K, CSC SYS 50FunctionsQuality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.The systematic solution for cuts in aluminum and plasticSaw teeth made of high-quality carbide – for optimum sawing speed resulting in perfect cutsCutting angle and tooth...