Shop By Brand

For DF 500 and DF 700FunctionsThe DOMINO Trim Stop enables precise and repeatable mortise placement in ends of narrow workpieces, such as rails or spindles. Designed for material between 7/8 inch and 2-3/4 inch (22 mm and 70 mm) in width. Sides adjust independently for centered or off-center mortising. Attaches quickly and easily to the Festool DOMINO Joiner without the need for tools.Holds narrow workpieces in place for precise and repeatable mortise placementSides adjust independently for...

For DF 500 and DF 700FunctionsThe DOMINO Trim Stop enables precise and repeatable mortise placement in ends of narrow workpieces, such as rails or spindles. Designed for material between 7/8 inch and 2-3/4 inch (22 mm and 70 mm) in width. Sides adjust independently for centered or off-center mortising. Attaches quickly and easily to the Festool DOMINO Joiner without the need for tools.Holds narrow workpieces in place for precise and repeatable mortise placementSides adjust independently for...

for CSC SYS 50Easy to move. Easy to use. Ideal with the CSC SYS 50 cordless table saw.The UG-CSC-SYS underframe cart is the ideal 3-in-1 solution when doing jobs with the CSC SYS 50. It acts as a hand cart for moving the saw from the vehicle to the point of use – allowing you to easily roll an entire tower of Systainers of up to 176 lbs (80 kg) to the jobsite. The foldaway legs can be easily deployed, giving you a worktable of 23" x 23" (58 x 58 cm) in size; a practical alternative to folding...

Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. Excellent for Cutting: WoodMDFPlywood AMAX Extended Life Features: 200% longer life time even when working with abrasive materialsSuperior geometric designAdvanced grinding technology that improves the carbides' resistance to wearSuper clean cuts ...

Tenryu Silencer Series8-1/2" x 60T ATAF Blade5/8" ArborWoodGreat For: Miter/ Chop SawsCut-offs and Miter CutsFinish Cuts

An excellent all around saw ideally suited for the small woodworking or cabinet shops where one saw is used for all different types of cutting. It can be used for ripping or cross cutting in solid woods, particle board, plywood or laminated panels.CBS105010" x 50T x 5/8"15° Hook Angle Plate - 0.087" | 2.2 mm Kerf - 0.125" | 3.2 mm

for SYSLITE KAL, KAL II and KAL CIncludespad for external standFunctionsfor flexible positioning of the SYSLITE KAL and KAL II working light and the SYSLITE KAL C cordless working lightMagnetic holding force 35.72 lb (16.00 kg)

for Systainer³ ToolBagIncludesQty. in pack: 2.00 UnitsFunctionsDurable hand tool storage insert.Hand tools and accessories can be clearly stored and carried in an organized manner with the many pocket compartments of the ToolBag. The robust inner pockets can be set up for different configurations allowing for custom layouts.Robust tool bags are made of high-quality and durable materialInserts can be set for custom layouts in the Systainer³ ToolBag via a hook-and-loop fastenerCustomizable...

FunctionsGive your CT AutoClean filter a deeper cleaning and contain all the dust with a simple flick of the sliding closure. Can also be used as a shut off value when used with Y-adapter, 452898.Provides a mechanism for easy, deep cleaning of the Festool CT AutoClean filterEnsures maximum dust extraction by cleaning filterCan also be used to prevent contents of dust extraction from spilling during transportEnsures extreme vacuum in containerThe filter undergoes thorough cleaningFor CT 36 AC...

for Systainer³ M 337/437Functionsfor storage of cartridges and cartridge caps

For OF 1400FunctionsReplacement.Improves dust extraction while edge routingSave on clean up timeKeep workspace cleanToolless attachment to or removal from router baseFor sideway extraction

Functions Sanding freedom Effortlessly transition from corded to cordless without compromising performance. Balanced with a unique ergonomic battery for optimum performance and handling. The ETSC 125 provides the same functionality of its corded counterpart but with hybrid power options - use it cordless or corded. The 18-volt Ergo battery provides up to 30 minutes of runtime at full power. Integrated, removable Protector provides protection to abutting surfaces as well as the pad for up close...

Functions Ready. For Anything. Tackle your most demanding (and remote) applications with the robust and versatile Carvex Cordless Jigsaws. Designed to deliver the same performance as their corded counterparts while taking advantage of the tool-less base change platform, these revolutionary jigsaws will have you forgetting that you've cut the cord.Stroke rate 1 000 - 3 800 RPMPendulum cover adjustment in stages 4.00Battery capacity 4.00 AhDrive type BatteryTechnology Bluetooth®Weight 3.97 lbs...

Functions Sanding freedom Effortlessly transition from corded to cordless without compromising performance. Balanced with a unique ergonomic battery for optimum performance and handling. The RTSC 400 provides the same functionality of its corded counterpart but with hybrid power options - use it cordless or corded. The 18-volt Ergo battery provides up to 30 minutes of runtime at full power. Integrated, removable Protector provides protection to abutting surfaces as well as the pad for up close...

Functions Our masterpiece. Decisively improved. Now with unique kickback stop. Often, even just a millisecond is crucial: The kickback is the most common cause of serious injuries when using a track saw. Our unique kickback stop therefore stops the saw blade of our cordless track saw in the blink of an eye, and so not only protects your workpiece but also helps to minimize the risk of injury to your hands. In addition, this now allows users to make powerful, precise cuts at up to twice the...

For the DOMINO DF 500 Includes Split anchor50x Bolt with Euro thread for drilling series of holes50x Plastic trays50x Cross anchor with threaded pinQty. in pack: 50.00 Units Perfect joinery. Now with even more versatility. The new knock-down DOMINO basic structure connectors and furniture connectors. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications –...

for RG 130 ECI, RG 130FunctionsThe best results when processing very hard substrates.The DIA Hard Premium D130 grinding disc for the RG 130 with a diamond segment height of 9/32" (7 mm) is well suited to larger surfaces on a hard substrate. Thanks to the use of high-quality materials and the segment height, the disc has a very long service life.Easy disc change in just a few stepsFast grinding of very hard substratesFirst-class materials and the segment height ensure a long service lifefor...

for KSC 60, SYMC 70FunctionsFor chip collection without an extractor.Even without a dust extractor connected, the chip collection bag ensures a working environment with reduced dust. Quickly attaches with a strong connection. The bag collects dust and chips precisely where they escape and is easy to empty thanks to the zipper. This means that you can make the most of the portable and compact design – while also ensuring a cleaner work environment.A working environment with reduced dust: Chip...

Includes SELFCLEAN filter bag SC-FIS-CT MINI/MIDI-2smooth suction hose dia. 27/32 x 3.5 m AS/CTR Functions Compact power. Clean results. With the new CT MIDI I, Festool affirms its place as the industry-leading, no-compromise pioneers of dust extraction. More than a mere update of the previous CT MIDI, the new CT MIDI I reimagines what a dust extractor can be. Powerful yet portable. Technically advanced yet easy to use. Durable yet adjustable to your unique needs. Easy to move thanks to...

for all applications and most 18-volt devices – with a focus on power and endurance (not compatible with the sanders ETSC 125, RTSC 400, DTSC 400 and the dust extractor CTC SYS)Includes2x BP 18 Li 5.0 ASI battery packTCL 6 DUO rapid chargerSystainer SYS3 M 187FunctionsStored, protected, organized, and charged in a flash: Two 5.0 Ah battery packs. One DUO Rapid Charger. In the Systainer³.The Festool Energy set is the ideal addition to the Festool Basic (no batteries included) cordless tools and...

Includes Qty. in pack: 48.00 Units EVA edge banding adhesive in white color to match most light colors of edge banding. Pack of 48. Also available in brown, black and natural. Unfilled EVA adhesive – perfect join quality on white decorEVA universal adhesive with high melting pointHigh softening range of approx. 167 °F (90°C), therefore also suitable for use on objects with a relatively high temperature resistance of 14 °F - 167 °F (-10°C – + 75°C)Chemical basis: Adhesive, resincontent per...

Granat Abrasives Our longest-lasting and best-performing abrasive - well suited for nearly all applications.Festool Grit Abrasives Granat D90 P100 GR/100 497366

Functions Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking...

For OF 2200FunctionsIncludes guide stop and accessory base plate with offset for use with OF 2200 and FS guide rails.Expand functionality of OF 2200 routerGuided cuts are perfectly straightAllows to start and end the cut anywhere in the materialAccuracy avoids waste of materialWithout guide rods ST-OF 2200/2With fine adjustment and support plate for router ...

For DF 500 and DF 700FunctionsDOMINO Hand Rail Fence for securely joining round workpieces such as handrails. For centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameter. Attaches quickly and easily to the DOMINO Joiner without the need for tools.Centers DOMINO machine on round workpieces such as handrailsTool-less attachment to Festool DOMINO JoinerFor centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameterMade in GermanyFor precise routing of round poles...

For DF 500 and DF 700FunctionsDOMINO Hand Rail Fence for securely joining round workpieces such as handrails. For centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameter. Attaches quickly and easily to the DOMINO Joiner without the need for tools.Centers DOMINO machine on round workpieces such as handrailsTool-less attachment to Festool DOMINO JoinerFor centering on round stock 1 3/8 to 2 3/8 inches (35mm to 60mm) in diameterMade in GermanyFor precise routing of round poles...

FunctionsReady. For Anything.Li-HighPower cell technology makes it powerful enough for every application. At just 1.2 lbs (600 g), it is 20% lighter and 50% more compact than a 5.2 Ah battery pack. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.Bluetooth® technology enables communication with your mobile dust extractor to start automatically when the cordless tool is switched onThe illuminated capacity display...

FunctionsReady. For Anything.Li-HighPower cell technology makes it powerful enough for every application. At just 1.2 lbs (600 g), it is 20% lighter and 50% more compact than a 5.2 Ah battery pack. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.Bluetooth® technology enables communication with your mobile dust extractor to start automatically when the cordless tool is switched onThe illuminated capacity display...

FunctionsOptional accessory for the Festool WCR 1000 Workcenter. This two-pronged hook offers substantial support for holding tools and other accessories. Rubber caps protect items from being damaged when hanging from the hook.For hanging two toolsFor use as a hose holdeFor WCR 1000, UCR 1000

Includes TID 18 cordless impact screwdriverTPC 18 cordless percussion drill2x BP 18 Li 4,0 HPC-ASI battery packrapid charger TCL 6FastFix keyless chuck 1/2" (13 mm)FastFix Right Angle Chuckadditional side-mounted hand gripBelt clipSystainer SYS3 DF M 237 Functions Ready. For Anything. An amazing duo! - the TPC 18 QUADRIVE Hammer Drill and the TID 18 Impact Driver together cover a wide range of applications with amazing power and performance. The perfect combination of the new generation...

Includessuction hose, D 50x2.5 m-ASNon-Antistatic Plastic Extension TubeWorkshop Floor Nozzlesquare nozzle D 50 QDsuction brush D 50 SPLarge Crevice NozzleFunctionsThe ideal set for heavy cleaning tasks.The cleaning set for industrial use and large debris. Perfectly suited to extract large wood chips and debris – no matter whether in the workshop or on the job site.for large cleaning tasks and debris in the workshop and on the job siteFor CT 26/36/48 ...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsthe jigsaw blade for a fine cut with conically sanded blades for a clean, splinter-free cutfor outstanding results in wooden materials thanks to high-grade HCS tool steelLength of cutting blade 3" (75 mm)Pitch 10 TPI (2.5 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

The quick-release nut secures the tool securely on the angle grinder with its counterpart clamping flange BF-AGCCompletely tool-free, it can be released quickly and easily and ensures a quick tool changeCompatible with Festool AGC 18 GrinderM14 thread, 5/8" diameter Securely fastening cutting discs or grinding wheels for metalwork or construction tasksFacilitating quick and tool-free changes between different grinding or cutting jobsEnhancing efficiency in tasks that require frequent tool...

Includes MW 1000 cartSYS-AZ-MW 1000 pull-out drawer Functions Turn any jobsite into your workshop. The MW 1000 is a customizable workshop that you can transport, set up, and breakdown in a flash on any jobsite. In just a few steps, the clever and compact unit becomes a stable workstation with space to access and use your tools wherever you are – just like in your own workshop. Combines worktops and storage while being customizable to your unique needsSave time by transporting your tools and...

For HL 850FunctionsThe Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter of seconds . Create exotic textures and add character to your work by simply replacing the standard planer head with one of three rustic heads. Produce fine or coarse wavy textures, or a scalloped effect to mimic a hand-hewn appearance. Spiral cutter engages the material with a...

For RAP 150FunctionsPolishing pad for Shinex RAP 150. Can be used with all Festool 150mm (6") polishing felts, sponges and skeepskins for polishing tasks on solid surfaces, acrylic, glass and paint. Integrated shock absorber for optimum distribution of pressure during polishing. Contains one pad.For use with SHINEX RAP 150 polishing machineWorks with all 150mm polishing accessoriesIntegrated shock absorber distributes pressure evenly on the work surfaceWith integrated shock absorber for...

For MFK 700FunctionsDesigned for straight routing in the horizontal configuration.Expand functionality of MFK 700 routerFine adjustment allows precise trimming of edge bandingAccuracy avoids waste of materialAllows for use of bearing-less bits in conjunction with feeler bearing set mounted to MFK 700 routerFor routing accurate angles

for RSC 18IncludesQty. in pack: 5.00 UnitsFunctionsVersatile. Appropriate for wood and demolition work.The wear-resistant bi-metal universal blade is suitable for cutting wood with nails in it and is suitable for demolition work.Ideal for cuts in solid wood with nailsThe high-temperature-resistant, wear-resistant bi-metal saw blade is ideal for general demolition workFlexible saw blade for flush cutsCross-set teeth for fast cuttingThe right saw blade can be found quickly with Festool's...

For RO 90 DXFunctions High-temp resistant for heavy-duty applications. (1 piece) General purpose sanding pad for flat and curved surfacesHigh temperature durability for long service lifeCompatible with Festool RO 90 DX sanderSoft versionHigh temperature durabilityfor universal use on flat and on curved surfaces Connecting thread FastFixDiameter 90 mm

For drywall sander PLANEXnot for the PLANEX LHS 2 225 EQ long-reach sandernot for the PLANEX LHS 2-M 225 EQ long-reach sanderFunctionsReplacement pad for the PLANEX Drywall Sander. The same pad that comes standard with the unit. 225mm diameter, includes one pad.For use with Festool PLANEX Drywall SanderFor general purpose drywall sanding on flat surfacesFor universal use on plain and arced surfacesUltra-soft, adaptable sanding padDiameter 8-1/2" (215 mm) ...

For TS 75Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 75 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and...

Functions Smooth, light, and flexible - for effortless extraction. The Festool suction hose: Light and flexible – with a smooth exterior for significantly improved handling, a longer service life, and a tapered design for increased suction power. The CLEANTEC connecting sleeve ensures a strong attachment to the tool – keeping the hose securely connected for optimum dust extraction. Robust, smooth outer skin prevents the suction hose from becoming caughtInternal, extremely flexible suction hose...

Functions Don’t go fishing for what you need with the SYS-SB Storage Box. Tackle all your small part needs keeping everything organized and easily accessible. No more guessing where things are thanks to the clear cover panels that help keep everything in its place. Easy to grab and go with the large bale-style handle and full Systainer system integration, the Storage Box helps you take care of the minor details so you can focus on the task at hand. Equipped with 5 adjustable storage containers...

for PLANEX LHS 2 225 EQ(I)IncludesAbrasive sheet STF D225/128 P80 GR/25Abrasive sheet STF D225/128 P120 GR/25Abrasive sheet STF D225/128 P150 GR/25Abrasive sheet STF D225/128 P220 GR/25FunctionsAbrasive assortment set for PLANEX Sanders.Stores abrasives in a dedicated space, clearly organized, efficiently protected against damage and easily accessible. The pivotal point of the Systainer is the T-LOC, the central locking element: Close, open, connect with just a single turn. Particularly...

Includes cover for label field Functions Systainer³ combines workshop and construction site. without tool insertproven systainer storage system

Functions Making exact and repeated cuts quickly and accurately anywhere without taking materials to a miter saw or sacrificing accuracy with a standard circular saw, makes this the ultimate solution for all wood processing on the jobsite. Coupled with FSK Guide Rails with integrated angle stops, HK saws bring a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any circular saw before. Also compatible with all existing FS Guide Rails. ...

For high volume, high speed cutting in dense natural woods and abrasive wood composites, use solid carbide bits. Solid carbide dissipates heat more uniformly, extending tool life. Single flute bits cut faster, with better chip clearance. Two-flute bits cut more slowly, but leave a smooth finish. Maximum RPM 28,000.Excellent For Cutting:Dense, Natural WoodsAbrasive Wood Composites ...