Shop By Brand

Includes suction hose diameter 27/32 x 3.5 m RAS-CTSELFCLEAN filter bag SC-FIS-CT 25Crevice Nozzle, D36Upholstery Brush Functions The specialist for extensive cleaning work. Ideal for cleaning where there are large volumes of dust and dirt at job sites, in shops and in offices: With a 6.6 gallon (25 liter) container volume, the CLEANTEC CT 25 extracts dust, dirt and water. Its design ensures that the full container volume can be used – for long periods of work without having to change the...

For KSC 60Includesadjustable stoptelescopic slide-out scalefold-out pedestal and carry casemetric measurement scaleFunctionsFor use in conjunction with the UG-KAPEX KS 60 adapter baseConsisting of KA-UG-L and KA-UG-RUsageMain applicationsFacilitates and supports KAPEX applicationsSupports long materialPrecise sawing of moldings and boardsLength of extension arm (without telescope) 58.26 in (1 480.00 mm)Max. meas. length 94.48 in (2 400.00 mm) ...

Includes Qty. in pack: 3.00 Units Functions 3 piece, 37 1/2" (L= 950 mm) D 36. Antistatic3-piece For D 27/D 36

for Systainer³ MFunctionsProtects the contentmade of foam

Granat Abrasives Our longest-lasting and best-performing abrasive - well suited for nearly all applications.Festool Grit Abrasives Granat D90 P180 GR/100 497369

for portable circular saws, routers with adapter, jigsaws with adapter, DSC-AG 125, DSC-AG 230FunctionsThe FS FS 1400/2-LR 32 Guide Rail (55 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32...

for HKC 55, HK 55, HK 85, TS 60 K, TSV 60 KIncludesScrew Clamp, 4-11/16"FunctionThe cross cutting guide rail has an adjustable stop and an integrated rubber spring, which automatically brings the saw back to the starting position.connectible cross-cutting guide rail system for angle cuts with repeat accuracySecure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide railflexibly adjustable mitre anglelocking positions make...

for AGC 18FunctionsSafe work. Protection for the hand.The hand guard protects you during work with wire brushes. Simply secure using the auxiliary handle on the AGC 18 cordless angle grinder and get started.Protection against injuries to handsEasy attaching in just a few stepsAdjustable for individual and precise settingfor safe work with wire brushesUsageMain applicationsFor safe work with wire brushes ...

IncludesQty. in pack: 5.00 Units Functions Hook-and-loop fastener is helpful for securely connecting power cables to CT hoses, keeping the workspace safer and more organized. for securing the cable to the suction hosesuitable for suction hoses with a diameter of 27 mm, 32 mm and 36 mm

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 5.00 UnitsFunctionsextra-long jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steelLength of cutting blade 3" (75 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Functions The new benchmark in circular saws. Festool track saws have been setting the standard for saws for decades. The TS 60 K is redefining this yet again. In the blink of an eye, the unique Kickback Stop protects your workpiece and helps to minimize the risk of injury. Designed to work with the entire Festool saw system and with a cutting depth up to 2-7/16" (62 mm). The most versatile saw of its kind guarantees you premium work results whether ripping, cross-cutting, beveled and angle...

Functions High gloss polishing formula. Silicone free formula. 500 ml bottle. Use with Festool white sponges. Achieve unmatched surface quality with the simple and straight-forward polishing system from Festool. Color-coded polishing compounds correlate with the appropriate sponge to deliver the perfect levels of finish. Polishing compounds come in easy-to-use squeeze bottle with resealable top and corresponding color bands to indicate which sponge is to be used with the polish. The clean and...

For DTS 400, DTSC 400, DS 400IncludesQty. in pack: 2.00 UnitsFunctionsProtects the sanding pad.The protection pad protects the sanding pad and the fastener from wearing out quickly, and thus increases the service life of the sanding pad and the fastener. The pad is quickly secured to the sanding pad with the fastener without tools.Protection pad for protecting the sanding pad and the fastenerFor use for abrasive mesh with dimensions of 100x150 mm, deltafor protecting the sanding pad when using...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsCharges two batteries at the same time: One charger for two battery packs.The TCL 6 DUO Rapid Charger supplies enough power to charge two battery packs at the same time. This is beneficial for all tools with a 2 x 18 V dual battery system. Being able to charge two battery packs at the same time is not only convenient, but reduces downtime as both batteries are ready at the...

for RSC 18IncludesQty. in pack: 5.00 UnitsFunctionsOur strongest saw blade for metal.The wear-resistant bi-metal saw blade is suitable for cutting metal profiles.Long service life and faster work progress when sawing metal1/16" (1.6 mm) pitch, ideal for cutting steel and iron profiles with a wall thickness of up to 5/16" (8 mm)Long lasting thanks to the high-temperature-resistant and wear-resistant bi-metal saw bladeFlexible saw blade for flush cutsCross-set teeth for fast cuttingThe right saw...

Suitable for abrasive V93For RO 90 DXFunctionsTriangular pad for detail sanding. (1 piece)Replacement triangular sanding padWorks with Festool 93mm sanding abrasivesCompatible with Festool RO 90 DX sanderDelta sanding padPlate without interchangeable sanding padFor attaching StickFix sanding pad, soft and hardConnecting thread FastFix ...

for TS 55 F, TSC 55 K, HK 55, HKC 55Quality cuts better.Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the machine.The all-rounder for all types of wood materialSaw teeth made of high-quality metal – for optimum saw progress and perfect cutsCutting angle and tooth shape are adapted to the...

For planer head HK 82 RFFunctionsThe Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter of seconds. Create exotic textures and add character to your work by simply replacing the standard planer head with one of three rustic heads. Produce fine or coarse wavy textures, or a scalloped effect to mimic a hand-hewn appearance. Spiral cutter engages the...

For PS 300, PSB 300, PS(C) 420, PSB(C) 420IncludesQty. in pack: 5.00 UnitsFunctionsSolid one-piece, transparent splinterguard for Festool jigsaws. With the first cut, the splinterguard is perfectly matched to the inserted blade, providing a zero-clearance insert for precision cutting. The splinterguard significantly improves the cut quality and eliminates time-consuming rework by reducing tear-out, even in delicate to cut materials like melamine. Use a new splinterguard with a new blade or...

Functions The new suction hose: Smooth and elastic – with smooth outer skin for significantly improved handling, a longer service life and increased suction power. The new Cleantec extraction sleeve ensures a secure fit on the tool. Robust, smooth outer skin prevents the suction hose from becoming caughtInternal, extremely elastic suction hose for maximum flexibilityThe CLEANTEC extraction sleeve securely connects the suction hose and power tool with bayonet fittingAntistaticTemperature-resista...

Functions Stores any abrasive in a dedicated space, clearly organised, efficiently protected against moisture and always to hand. The pivotal point of the Systainer is the T-LOC, the central control element: Close, open, connect with just a single turn. Particularly time-saving: With T-LOC, the Systainer T-LOC can be opened without having to disconnect it from the other SystainerS beforehand. with insert for abrasives measuring 80 x 133 mm with dia. 125 mm and Delta ...

Includes cover for label field Functions Systainer³ combines workshop and construction site. with a broader base area for even more spacewithout tool insert

Tenryu Silencer Series12" x 100T ATAF Blade1" ArborWoodGreat-For:Miter/Chop SawsCut-Offs and Miter CutsUltra Fine Cuts

Invisible Self-Clamping Glue Aid(Preload Function Compatible)Install with Zeta P2 or CNCMaterial: Fiberglass Reinforced PlasticSize: 66 x 28 x 9.7 mmLateral Tolerance: ± 1 mm

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.SPE1080T10" x 80T x 5/8" TCG Carbide Saw5° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

for AGC 18UsageMain applicationsAuxiliary handle with vibration dampingHolder M8

For OF 2200FunctionsAccessory base with dust channels for use with template guides.Improves dust extractionSave on clean up timeAllows for more precise routing, especially on cornersAvoids risk of base opening catching on the cornerfor copying rings D 12.7–36 mmWith openings for optimised extraction

For the OF 1400, OF 2000, OF 2200FunctionsFaster and easier bit changes with one wrench.Works on the Festool OF2200 and OF2000 (24mm Wrench)Dramatically reduces bit slippingMaintain center line and higher precission cuts over the life of the colletFor router shank dia. 5/16"dustproof clamping colletsopen-ended spanner width 24 mm

For SYS-Storage Box SYS-SBIncludesQty. in pack: 2.00 UnitsFunctionsPlastic containers used to store consumable and small parts.Compatible with the SYS-Combi 2, SYS-Combi 3 and SORTAINER SYS 4Plastic containers and compartment dividers for individual drawer partitionsfor tidy storageDimensions (L x W x H)7" (180 mm) x 4-3/4" (120 mm) x 2-3/4" (71 mm) ...

for OF 1010, OF 1010 R, OFK 700, MFK 700FunctionsFlush trim cutter with ball bearing for edge trimmingFeaturing robust 8mm shank12x12mm reversible blade can be used 4 timesFor use with OF 1010 and MFK 700 EQ/B routersFeaturing robust 8mm shank1/2" x 1/2" (12 x 12 mm) reversible carbide blade is replaceableAlpha 0.00 °NL 1/2" (12 mm)D 3/4" (19 mm)GL 2" (52 mm) ...

for RG 130 ECI, RG 130FunctionsFast and thorough work against thick layers of paint and clear coat.The DIA Paint diamond disc was specially developed for painters. It is the ideal solution for removing stubborn layers of paint and clear coats from wood. In combination with the RENOFIX RG 130 diamond grinder, the special disc can take on strenuous rough work.Fast work progress and shorter machining times compared with manual removalIdeal for extensive removal of paint and clear coat on...

For DF 700Functions12mm cutter for the DOMINO XL DF 700 Joiner for use with 12mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 12mm tenonsRouting tools with threaded supports for the...

For the DOMINO DF 500FunctionsDurable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect fit and precise joint placement.6mm DOMINO Cutter for use with 6mm DOMINO tenons.Carbide tipped bit - withstands 5,000 to 14,000 joints, depending on materialSpiral flutes for clean cutsInternally threaded for quick, easy bit changesCreates perfect mortise width for Festool 6 mm tenonsrouting tool with threaded support for the DOMINO DF 500...

For RTS 400, RTSC 400, DTS 400, DTSC 400, ETS 125, ETSC 125FunctionsRe-usable capture bag comprised of extra-durable nonwoven polyester for extra-long life. These bags are meant to capture sanding dust, be emptied, and then re-used many times.For holding dust and for dust-free disposal of the extracted productmade of high-strength, durable polyester sanding cloth

Includes main filterSELFCLEAN Filter Bagsmooth suction hose dia. 27/32 x 3.5 m AS/CTR Functions Compact but large. Light but powerful. Whether it's used on the construction site or in the workshop, thanks to its huge container capacity of 26 l, the CLEANTEC CT 26 provides maximum volume with compact dimensions. Equipped with swiveling castor wheels and rear wheels for optimum mobility. It also has a locking brake that provides stability on any surface as well as during transport. The flat...

IncludesQty. in pack: 2.00 UnitsFunctions2-piece, Length 38" (970 mm), Diameter 50 mm.Plastic, 2 piecesFor D 50

for Systainer³ LFunctionsProtects the contentmade of foam

Granat Abrasives Our longest-lasting and best-performing abrasive - well suited for nearly all applications.Festool Grit Abrasives Granat D90 P220 GR/100 497370

for portable circular saws, routers with adapter, jigsaws with adapterFunctionsThe FS FS 2424/2-LR 32 Guide Rail (95 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800...

for HKC 55, HK 55, HK 85, TS 60 K, TSV 60 KIncludesScrew Clamp, 4-11/16"FunctionThe cross cutting guide rail has an adjustable stop and an integrated rubber spring, which automatically brings the saw back to the starting position.connectible cross-cutting guide rail system for angle cuts with repeat accuracySecure fixing to workpieces thanks to fastening clamp which can be conveniently attached to the groove in the cross cutting guide railflexibly adjustable mitre anglelocking positions make...

FunctionsReady. For Anything.Li-HighPower cell technology makes it powerful enough for every application. At just 1.2 lbs (600 g), it is 20% lighter and 50% more compact than a 5.2 Ah battery pack. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.Bluetooth® technology enables communication with your mobile dust extractor to start automatically when the cordless tool is switched onThe illuminated capacity display...

for BS-KV D15IncludesDepth StopPerfect joinery. Now with even more versatility. The new knock-down DOMINO basic structure connectors and furniture connectors.The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.The new...

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 20.00 UnitsFunctionsextra-long jigsaw blade with extremely sharp Japanese teeth for highly precise cuts in woodthe material consists of high-quality HCS tool steelLength of cutting blade 3" (75 mm)Pitch 9 TPI (2.8 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Provides a work surface when coupled with Adapter Plate (500 175) for stationary edge banding applications. Requires Festool MFT/3 Table, sold separarely. Allows the user to swivel the machine (0 – 47°) in the bench in combination with adapter plate AP-KA 65 and position the workpiece horizontally during edging - for convenient and safe guidance, even with larger objectsDimensions length x width 3/8" (1 102 mm) x 28-1/4" (718 mm) ...

Functions The Perfectionist. Splinter-free cuts like never before. Perfect from the very first cut. The TSV 60 K plunge-cut saw with scoring blade. Since 1980, Festool tracksaws have been known for their reliable quality and absolute precision. Our objective: The perfect cut. With the TSV 60 K plunge-cut saw with scoring blade, we have achieved exactly that. Splinter-free cuts on both sides now from the very first cut. Coupled with the built-in KickbackStop, which stops the blade in the blink...

for all battery packs from the 10.8 V, 14.4 V and 18 V classes (with the exception of: BP-XS for CXS/TXS 10.8 V)FunctionsFaster re-charge for less down time. AIRSTREAM batteries with the new SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non-equipped versions so the charging process can begin sooner getting you back to work faster.With AIRSTREAM functionLithium-ion (Li-ion) replacement charger for all...

for RSC 18FunctionsCut insulating materials with ease.The extra-long insulating material saw blade made of HCS tool steel is suitable for cutting a wide variety of insulating materials and cardboard.Extra-long blade for cuts in thick bundles of insulating materialSerrated for cutting insulating materialsWide saw-blade back for straight cutsLong-lasting HCS tool steelKnife edge suitable for plunge-cuttingThe right saw blade can be found quickly with Festool's color-coding: The color green...

for ETS 2 125, ETS EC 125, LEX 125FunctionsThe secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool System, you’ll find a solution for virtually any application, and you’ll produce better results with pads, abrasives, sanders and dust extractors designed to work seamlessly and efficiently together. Festool sanding pads are designed as carefully as every other component for optimum performance and a long life. All of our pads are...