Products 337-384 of 5340
Show
Availability: In Stock
Item #: 201693 -
Re-usable capture bag comprised of extra-durable nonwoven polyester for extra-long life. These bags are meant to capture sanding dust, be emptied, and then re-used many times.
Availability: In Stock
Item #: 144020 -
#20 - 56 x 23 x 4mmThe biscuit is the original, tried-and-tested connector from the inventor of the system and provider of the complete solution. The success of the biscuit is based on the quick and simple application, stable and high-quality connections as well as the minimal material fatigue that is so important for panel materials. The original guarantees quality in size accuracy, optimum glue distribution and form stability as well as the sustainable cultivation of beech wood. The perfect...
Availability: In Stock
Item #: 495718 -
Festool Parallel Guide Extension 495718 (TS 55 + 75)Perfect for making narrow repetitive rip cuts. Attaches to Parallel Guide and accepts the same stops for cuts up to 7-11/16 " (195 mm).(Guide Rail and Parallel Guide not included)
Availability: In Stock
Item #: 495718-clone1 -
Festool Parallel Guide Extension 495718 (TS 55 + 75)Perfect for making narrow repetitive rip cuts. Attaches to Parallel Guide and accepts the same stops for cuts up to 7-11/16 " (195 mm).(Guide Rail and Parallel Guide not included)
Availability: In Stock
Item #: 492371 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 499165 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: KSC24 -
24" Auto-Adjust Bar Clamp KSC24When you want the durability and auto-adjust convenience of Automaxx® clamping, but you need more clamping capacity, turn to Auto-Adjust Bar Clamps with Automaxx Technology. Just like other Kreg Clamps, these bar clamps adjust automatically when you change material sizes. Just slide the clamp jaws against your workpiece, and then squeeze the handles. Automaxx Technology does the rest, closing the clamp with predictable, dependable clamping pressure every time....
Availability: In Stock
Item #: 917 -
DELTA CUTTER 1/4" STRAIGHT
Availability: In Stock
Item #: 204861 -
Container Set Box 100x150x68/6 pieces 204861
Availability: In Stock
Item #: 497871 -
DF 700 14 mm Cutter 497871This cutter needed to use corner and flat connectors.
Availability: In Stock
Item #: 200160 -
Easily and safely transport FSK Guide Rails. Equipped with shoulder strap.Available for the FSK 420 and FSK 670 rails.
Availability: In Stock
Item #: 498328 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 144010 -
#10 - 53 x 19 x 4mmThe biscuit is the original, tried-and-tested connector from the inventor of the system and provider of the complete solution. The success of the biscuit is based on the quick and simple application, stable and high-quality connections as well as the minimal material fatigue that is so important for panel materials. The original guarantees quality in size accuracy, optimum glue distribution and form stability as well as the sustainable cultivation of beech wood. The perfect...
Availability: In Stock
Item #: 203155-clone1 -
Festool Parallel Guide Extension Set 203155 (TS 55 + 75)Includes both 495717 and 495718.
Availability: In Stock
Item #: 492372 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 499166 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 202459 -
For medium/fine sanding and finishing. The extra softness is more forgiving and allows the abrasive to float easier on the surface for smoother result.
Availability: Discontinued
Item #: 487519 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 577040-clone1 -
Festool Angle Unit 491588 (TS 55 + 75) Connects to the upper T-slot of FS Guide Rails for setting angles on material. 180° marked scale. Transfer angles from the wall to the work piece.
Availability: In Stock
Item #: 577040 -
Festool Angle Unit 491588 (TS 55 + 75) Connects to the upper T-slot of FS Guide Rails for setting angles on material. 180° marked scale. Transfer angles from the wall to the work piece.
Availability: In Stock
Item #: 204862 -
Container Set Box 100x350x68/2 pieces 204862
Availability: In Stock
Item #: 200161 -
Easily and safely transport FSK Guide Rails. Equipped with shoulder strap.Available for the FSK 420 and FSK 670 rails.
Availability: In Stock
Item #: 498329 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 203348 -
6" (150 mm)Extremely soft foam pads, the interface pads allow the abrasive to float, producing smoother results on delicate profiles and contours. This set comes with two (2) 5 mm-thick pads. Use the interface pads separately or stacked together for additional softness. (2 pieces)
Availability: In Stock
Item #: ACS735 -
Kreg Adaptive Cutting System Splinter Guards ACS735 Restore clean, splinter-free cuts to the Kreg® Plunge Saw Replacement splinter guards (set of 3) for the Adaptive Cutting System Plunge SawEasy to replace and adjustCreates a zero-clearance blade opening The Splinter Guard mounts in the Plunge Saw shroud and fits tight against the blade on the side not touching the Guide Track. This ensures splinter-free cuts on both sides of the blade. Over time, as cutting wears the splinter guard, it may...
Availability: In Stock
Item #: 144000 -
#0 - 47 x 15 x 4mmThe biscuit is the original, tried-and-tested connector from the inventor of the system and provider of the complete solution. The success of the biscuit is based on the quick and simple application, stable and high-quality connections as well as the minimal material fatigue that is so important for panel materials. The original guarantees quality in size accuracy, optimum glue distribution and form stability as well as the sustainable cultivation of beech wood. The perfect...
Availability: In Stock
Item #: 499167 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 492284 -
Hard StickFix pad maintains a crisp flat surface especially on edges. Great for surface leveling.
Availability: In Stock
Item #: 577039 -
Festool Connector 482107 (TS 55 + 75)Connects two Guide Rails for long work pieces by sliding into the T-slot grooves in the rails. With 2 adjustable set screws per end for a secure connection.(1 piece; 2 are needed)
Availability: In Stock
Item #: 577039-clone1 -
Festool Connector 482107 (TS 55 + 75)Connects two Guide Rails for long work pieces by sliding into the T-slot grooves in the rails. With 2 adjustable set screws per end for a secure connection.(1 piece; 2 are needed)
Availability: In Stock
Item #: 204863 -
Container Set Box 150x150x68/6 pieces 204863
Availability: In Stock
Item #: 498330 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: Call for Availability
Item #: ACS745 -
Kreg Adaptive Cutting System Project Table Replacement Top ACS745 Precision-machined MDF replacement surface for the Adaptive Cutting System Project TableIdentical to original-equipment table surfaceIncludes mounting hardware and instructions Replace a worn or damaged table surface on the Project Table without buying a complete new top. The MDF Replacement Top is machined to the same precision as the original. Includes with mounting hardware. ...
Availability: In Stock
Item #: 499168 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 202460 -
Hard StickFix pad maintains a crisp flat surface especially on edges. Great for surface leveling.
Availability: In Stock
Item #: 496802 -
3.5" (90 mm)Triangular pad for detail sanding. (1-piece)
Availability: In Stock
Item #: 204864 -
Container Set Box 150x300x68/2 pieces 204864
Availability: In Stock
Item #: 497390 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 492271-clone1 -
For profiles and contours. The extreme softness and give allows the abrasive to float easier on the surface for smoother results.
Availability: In Stock
Item #: ACS440 -
Kreg Adaptive Cutting System Extension Brackets ACS440 Brackets for extending the Adaptive Cutting System Project Table work areaMount in aluminum table perimeter and accept 2x4 boards to extend work area of Project Table2x4s can be supported by a Kreg® Track Horse, Mobile Project Center, or another work supportAdjustable to position 2x4 supports flush with table surface, or 3/4" below when adding a plywood table surface is desiredDurable steel construction Add more workpiece support to the...
Availability: In Stock
Item #: 499093 -
Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...
Availability: In Stock
Item #: 496803 -
3.5" (90 mm)For sanding in narrow places such as shutters and louvers. (1-piece)
Availability: In Stock
Item #: 495207-clone1 -
FestoolSplinterguard Replacement 55" 495207 (TS 55 + 75)FS-SP 1400/T (55")Adhesive-backed Splinterguard to maintain splinter-free cut quality. Splinterguard material is semi-transparent for better visibility of the cut line and is quick and easy to replace.