Shop By Brand

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Ideal for table saw use to provide fine finishing cuts in plywood, veneered panels, single-side laminated panels, masonite (coated or uncoated) along with crosscutting hard and soft woods.LSP1060A10" x 60T x 5/8" ATB Carbide Saw10° Hook AnglePlate: 0.087" | 2.2 mmKerf: 0.125" | 3.2 mm

6" Bench Clamp KBC6These versatile clamps are perfect for creating flush-fitting assemblies with Kreg Joinery, and they're great for project assembly, routing, cutting, sanding, drilling, and more. Bench Clamps work with Clamp Trak and Plates, the Clamp Table, Mobile Project Center, and more to secure workpieces using an extra-large padded clamp face that evenly distributes clamping force. Two sizes are available: 6" reach with 5" capacity, and 3" reach with 31/4" capacity.Auto-Adjust...

DELTA CUTTER

Alignment ElementsMaterial: PlasticSize: 65 x 27 x 7 mmLateral Tolerance: ± 2 mm

Crown-Pro™ KMA2800Installing crown molding is one of the best ways to add instant value to your home. The Kreg Crown-Pro™ simplifies the most frustrating steps of the process, so you make fewer mistakes and get the job done faster!-Exact AnglesThis uniquely-designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts and difficult “coping.”-Versatile & CompatibleIts curved design lets you compensate for a wide variety of crown molding spring...

6" (150 mm)High-temp resistant for heavy-duty apllications. (1-piece)

for Systainer³ ToolBagIncludesQty. in pack: 2.00 UnitsFunctionsDurable hand tool storage insert.Hand tools and accessories can be clearly stored and carried in an organized manner with the many pocket compartments of the ToolBag. The robust inner pockets can be set up for different configurations allowing for custom layouts.Robust tool bags are made of high-quality and durable materialInserts can be set for custom layouts in the Systainer³ ToolBag via a hook-and-loop fastenerCustomizable...

For OF 1400FunctionsAccessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit.Allows for faster and easier corner routingEnables more precise corner routingAvoids risk of base opening catching on the cornerAdditional support and stability, especially with small diameter bitsHard-fibre base runner with 3/4" (20 mm) centre boreReduces the opening of the router to the cutter diameterMax. cutter...

for all 18-volt devices (except ETSC 125, RTSC 400, DTSC 400, CTC SYS) Functions Communicate via Bluetooth®. The new Bluetooth® battery packs communicate with the Bluetooth® module on the mobile dust extractor and ensure that even a cordless tool starts the mobile dust extractor automatically when switched on. This allows you to now benefit from Festool's entire dust-free system when working with Festool cordless products. In combination with the SCA 8 AIRSTREAM rapid charger, battery parks...

For the DOMINO DF 500Includes25x Bolt with external thread for DOMINO centre panel connector25x Bolt with internal thread for DOMINO centre panel connector50x Plastic trays50x Cross anchor with threaded pinQty. in pack: 25.00 UnitsPerfect joinery. Now with even more versatility. The new knock-down DOMINO basic structure connectors and furniture connectors.The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for...

Functions Cordless and compact dust extraction perfect for cordless tools. Enjoy the freedom and convenience of cordless dust extraction. The new CTC MIDI is our largest and most powerful cordless dust extractor yet – featuring a 36-volt turbine (18V x 2) with up to 109 CFM (3100 l/min) and 76” (19000 Pa) of static water lift. Easily integrated with other cordless tools with the dependable and proven automatic start via a Bluetooth® equipped battery or the supplied remote control. Fully...

Functions Our masterpiece. Decisively improved. Now with unique kickback stop. Often, even just a millisecond is crucial: The kickback is the most common cause of serious injuries when using a track saw. Our unique kickback stop therefore stops the saw blade of our cordless track saw in the blink of an eye, and so not only protects your workpiece but also helps to minimize the risk of injury to your hands. In addition, this now allows users to make powerful, precise cuts at up to twice the...

FunctionsUtilizing suction from a CT Dust Extractor, the CT Wings provide an additional support for mounting long items to a wall like molding, or holding a straight-edge or level in place for layout marks. With 16 adjustable "wings", CT Wings adjust and conform to molding and other stock quickly while providing a tacky grip surface to minimize movement. A bypass-valve allows for quick and easy release and reset without going back to the extractor.Acts as an extra hand to hold materials, a...

for OSC 18IncludesOSC-A AdapterFunctionsEnables plunge cuts with a defined depthcontains two inserts: A rotating depth stop for plunge cuts and a sliding shoe for long, straight cutsincludes an adapter for fitting accessories without toolsworking angle can be flexibly adjustedMax. plunge depth, sliding shoe 3/4" (20.00 mm)Weight 0.44 lbs (0.2 kg)Notch scale on depth adjuster 1/16" (1.50 mm)Max. plunge depth, depth stop 2-1/4" (56.00 mm) ...

for RG 130 ECI, RG 130FunctionsThe best results when processing abrasive substrates.The DIA ABRASIVE Premium D130 grinding disc for the RG 130 with a diamond segment height of 9/32" (7 mm) is well suited to abrasive materials containing a lot of sand on smaller surfaces. Thanks to the use of high-quality materials and the segment height, the disc has a very long service life.Easy disc change in just a few stepsFast grinding of abrasive substratesFirst-class materials and the segment height...

FunctionsPolypropylene (PP) with air regulating slide to adjust suction power. To connect tubes to extraction hose for comfortable grip.AntistaticWith sliding air regulator for suction power adjustmentwith bayonet fitting for secure connection to the extractor hoseCurvedFor D 27/D 36

For OF 2200FunctionsWhen used with the Festool OF 2200 Router, the Edge Guide allows you to rout up against, or perfectly parallel to the material edge, delivering precise dados, flutes, grooves, ploughs, rabbets and profiles. Fine-adjustment control allows you to dial in the distance from the edge in increments of 1/10mm for ultra-precise routing. The Edge Guide is constructed from durable cast aluminum, and includes fiber-reinforced plastic thumbscrews for easy adjustment and a long service...

For KSC 60FunctionsIntermediate bases for elevating the KS 60 to the height of a Systainer SYS 1 T-LOC and ClassicTable height = Systainer: Long workpieces can be comfortably supported on the floor while workingFor retrofitting the KS 60Items already included in the KS 60 SET

Includes Qty. in pack: 48.00 Units EVA edge banding adhesive in black color to match most dark colored edge banding. Also available in brown, white and natural. Unfilled EVA adhesive – perfect join quality on black decorEVA universal adhesive with high melting pointHigh softening range of approx. 167 °F (90°C), therefore also suitable for use on objects with a relatively high temperature resistance of 14 °F - 167 °F (-10°C – + 75°C)Chemical basis: Adhesive, resincontent per cartridge: 50...

For OF 1010FunctionsIncludes Fine Adjustment for OF 1010 EQ Edge Guide.Allows for finer adjustments when using the Edge Guide router attachmentFor use with OF 1010 EQ RouterFor fast and dimensionally accurate adjustment on the parallel side fenceCan be retrofittedDelivered without side stop and guide rods

The 7/8" diameter clamping flange together with the counterpart QRN-AGC quick-release nut secures the tool on the angle grinder. Compatible with Festool AGC 18 Grinder.

for Systainer³ MIncludesQty. in pack: 2.00 UnitsFunctionsdiced sections can be pushed out to produce any desired aperture

Functions Festool FS Guide rails are available in six different lengths from 32 inches to 118 inches (800 - 3000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking...

For WCR 1000; Standard hooks for mounting on the pegboard. Qty. in pack 6 units.

for PS 300, PSB 300, PS 400, PSC 400, PSBC 400, PSB 400, PS 420, PSB 420, PSC 420, PSBC 420IncludesQty. in pack: 25.00 UnitsFunctionsthe jigsaw blade for a fine cut with conically sanded blades for a clean, splinter-free cutfor outstanding results in wooden materials thanks to high-grade HCS tool steelLength of cutting blade 3" (75 mm)Pitch 10 TPI (2.5 mm)Max. workpiece thickness 1-3/16" (30 mm) ...

Includes saw bladesplinterguardplug it-power cable (4 m)Systainer SYS3 M 137 Functions Designed to fit your hand with a low profile Most jigsaws have a hard time staying on course. Hard material and curves can easily cause the blade to deflect, resulting in time consuming re-cutting or sanding. Trion jigsaws are designed with adjustable carbide-tipped jaws that work with the blade clamping system and back-up bearing for triple blade guidance that keeps the blade perpendicular to the shoe at...

Includes MW 1000 cartSYS-AZ-MW 1000 pull-out drawerTSB/1-MW 1000 table Functions Turn any jobsite into your workshop. The MW 1000 is a customizable workshop that you can transport, set up, and breakdown in a flash on any jobsite. In just a few steps, the clever and compact unit becomes a stable workstation with space to access and use your tools wherever you are – just like in your own workshop. Combines worktops and storage while being customizable to your unique needsSave time by...

For HL 850FunctionsThe Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter of seconds . Create exotic textures and add character to your work by simply replacing the standard planer head with one of three rustic heads. Produce fine or coarse wavy textures, or a scalloped effect to mimic a hand-hewn appearance. Spiral cutter engages the material with a...

Functions Speed Cut abrasive polish. Silicone free formula. 500 ml bottle. Use with Festool orange sponges. Achieve unmatched surface quality with the simple and straight-forward polishing system from Festool. Color-coded polishing compounds correlate with the appropriate sponge to deliver the perfect levels of finish. Polishing compounds come in easy-to-use squeeze bottle with resealable top and corresponding color bands to indicate which sponge is to be used with the polish. The clean and...

For MFK 700Includestarnishing padextraction hoodFunctionsReplacement for the slight inclination of the base, which helps prevent damage to the workpiece surface.Save time not having to file the edgeFine adjustment allows precise trimming of edge bandingAccuracy avoids waste of materialAllows for use of bearing-less bits in conjunction with feeler bearing set mounted to MFK 700 routerlow-dust routing thanks to extraction hood ...

for RSC 18IncludesQty. in pack: 5.00 UnitsFunctionsVersatile. Appropriate for wood and demolition work.The wear-resistant bi-metal universal blade is suitable for cutting wood with nails in it and is therefore ideal for demolition work.Ideal for cuts in solid wood with nailsThe high-temperature-resistant, wear-resistant bi-metal saw blade is ideal for general demolition workFlexible saw blade for flush cutsCross-set teeth for fast cuttingThe right saw blade can be found quickly with Festool's...

for TS 55 F, TSC 55 K, HK 55, HKC 55Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These beveled teeth alternate with the flat teeth when cutting into the material for smoother and more efficient cutting. This thin-kerfed blade design meets less resistance, for more...

Functions An ultra-light weight, flexible hose for use with the PLANEX Drywall Sander and other tools that accept a 36mm (1-1/2") hose, with the exception of the HL 850 planer. Has a flange used to lock the hose to the PLANEX for a secure fit that won't come lose during sanding. AntistaticTemperature-resistant to 158 °F (+70°C)Extremely flexibleKink-resistant suction hosewith bypass sleeve for extremely light fillers: enables the suction effect of the PLANEX on the wall to be reduced to an...

For DF 500 and DF 700FunctionsReplacement part for DOMINO Joiners. The Base Support Bracket now includes integrated index stops, providing accurate reference points for mortising near the edge of a workpiece. This is particularly useful for narrow workpieces. When using the flip stops, the center of the cut is 20mm (25/32") from the edge versus 37mm (1-15/32") without. The flip stops offer optimal flexibility when using the new 4mm DOMINO cutter and tenons.Provides additional support below the...

For DF 500 and DF 700FunctionsReplacement part for DOMINO Joiners. The Base Support Bracket now includes integrated index stops, providing accurate reference points for mortising near the edge of a workpiece. This is particularly useful for narrow workpieces. When using the flip stops, the center of the cut is 20mm (25/32") from the edge versus 37mm (1-15/32") without. The flip stops offer optimal flexibility when using the new 4mm DOMINO cutter and tenons.Provides additional support below the...

Functions Improve the way you work while making it more convenient to get the job done. Safely secure your workpiece for improved results with the most portable work-surface that provides multiple clamping points. The new SYS-MFT brings worktable functionality to a highly portable surface. The SYS-MFT also provides storage for all your key tools like clamps and hand tools. Equipped with 13 clamping points, an integrated V-groove for securing round stock like dowels and pipes, a non-skid strip...

Includes cover for label field Functions Systainer³ combines workshop and construction site. without tool insertproven systainer storage system

Functions Making exact and repeated cuts quickly and accurately anywhere without taking materials to a miter saw or sacrificing accuracy with a standard circular saw, makes this the ultimate solution for all wood processing on the jobsite. Coupled with FSK Guide Rails with integrated angle stops, HK saws bring a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any circular saw before. Also compatible with all existing FS Guide Rails. ...

for SYSLITE DUO, SYSLITE KBS CFunctionsSuitable for the toughest jobs thanks to its sturdy design and powder coating, the SYSLITE DUO locks reliably using a locking pin that prevents keeps your lights secure.SYSLITE STL 450 connects with optional adapter (201936)Comes with insulating plastic feet, a secure base thanks to wide stance, and cable clamp to guide the SYSLITE DUO cableSyslite DUO or Syslite STL 450 sold separatelyContinuously height-adjustable from 59" to 79" (150 - 200 cm) via two...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Kreg Adaptive Cutting System Project Table - Top ACS-TTOP Portable, multipurpose table top with integrated guides for precise rip, angled, and crosscuts in boards and plywood. MDF and aluminum table designed to support and position solid wood and plywood while cutting with the Kreg Adaptive Cutting System Plunge Saw and Guide TrackLarge 55" x 29 3/4" surface supports plywood sheets and boards while cuttingIntegrated measuring scales ensure accurate, repeatable cuts and simple...

Kreg Jig® Mini MKJKIT-Simple.The Kreg Jig® Mini is good for very specific applications where the smallest jig possible is required. The simplistic design includes the hardened-steel drill guide of the other jigs but does not include a reference fence, so material thickness adjustments must be made manually.-Unlimited Material ThicknessThe Kreg Jig® Mini is the only Kreg Jig® that does not include a positioning fence. This fenceless design allows you to make precise angle and stock depth...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Replacement Sanding Pad for the RTS 400 REQ

Just like so many of our tools, our abrasives are designed with dust extraction as a primary consideration. It isn't enough to just put holes in the paper; they have to work together with the pad for optimum airfow while ensuring consistent finish results. All this with less mess and longer lasting abrasives. Quality is more than what goes into making an abrasive--it's what you get out of an abrasive. Festool abrasives are designed to match the performance of Festool sanders for the ultimate...

Tenryu Silencer Series12" x 60T ATAF Blade1" ArborWoodGreat For:Miter/Chop SawsCut-Offs and Miter CutsGeneral Purpose